OKR-T-10-W12-C

www.murata-ps.com OKR-T/10-W12 Series Adjustable Output 10-Amp SIP-mount DC/DC Converters Typical unit FEATURES 600 KHz operation 4.5-14 Vdc input voltage range Programmable output voltage from 0.591-6.0 VDC Drives up to 200 μF ceramic capacitive loads High power conversion efficiency at 92% Outstanding thermal derating performance Over temperature and over current protection On/Off control SIP, 0.41 x 0.65 x 0.3 inches (10.4 x 16.5 x 7.62 mm). Meets UL/EN/IEC 60950-1 safety certification RoHS-6 hazardous substance compliance PRODUCT OVERVIEW The OKR-T/10 series are SIP non-isolated Point-of-Load (PoL) DC/DC power converters measuring only 0.41 x 0.65 x 0.3 inches (10.4 x 16.5 x 7.62 mm). The wide input range is 4.5 to 14 Volts DC. Based on 600 KHz synchronous buck topology, the high power conversion efficient Point of Load (PoL) module features programmable output voltage and On/Off control, under voltage lock out (UVLO), overcurrent and over temperature protections. These units meet all standard UL/EN/ IEC 60950-1 safety certifications and RoHS-6 hazardous substance compliance. +Vin F1 On/Off Control External DC Power Source Open = On Closed = Off (Positive On/Off) Common Controller t
4XJUDIJOH t
'JMUFST t
$VSSFOU
4FOTF Reference and Error Amplifier Figure 1. Simplified Block Diagram +Vout Trim Common For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKR-T/10-W12 Series.A07 Page 1 of 10 OKR-T/10-W12 Series Adjustable O...