MOSPEC
MBRF1030C Thru MBRF1060C
Switchmode Full Plastic Dual Schottky Barrier Power Rectifiers
Using the Schottky Barr...
MOSPEC
MBRF1030C Thru MBRF1060C
Switchmode Full Plastic Dual
Schottky Barrier Power Rectifiers
Using the
Schottky Barrier principle with a Molybdenum barrier metal. These state-of-the-art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes.
Features * Low Forward Voltage. * Low Switching noise. * High Current Capacity * Guarantee Reverse Avalanche. * Guard-Ring for Stress Protection. * Low Power Loss & High efficiency. * 175℃ Operating Junction Temperature * Low Stored Charge Majority Carrier Conduction. * Plastic Material used Carries Underwriters Laboratory
Mecnanical Data *Case :JEDEC ITO-220AB molded plastic body *Termals:Plated lead,solderable per MIL-STD-750, Method 2026 *Polarity:As marked *Mounting Torqure: 5 in-lbs. max *Weight:1.7 g approx. *High temperature soldering guaranteed 260℃/10 seconds
*In compliance with EU RoHs 2002/95/EC directives
SCHOTTKY BARRIER RECTIFIERS 10 AMPERES 30-60 VOLTS
ITO-220AB
MAXIMUM RATINGS
Characteristic
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
RMS Reverse Voltage
Average Rectifier Forward Current Total Device (Rated VR),TC=100℃
Peak Repetitive Forward Current (Rate VR, Square Wave, 20kHz)
Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz)
Operating and Storage Junction Temperature Range
Symb...