SMA45A

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMA5.0 THRU SMA170CA Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 300 Watts FEATURES For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability Repetition Rate (duty cycle): 0.01% Fast response time: typical less than 1.0ps from 0 volts to BV for unidirectional types Typical ID less than 1μA above 10V High temperature soldering: 250℃/W seconds at terminals Plastic package has Underwriters Laboratory Flammability Classification 94V-O DO-214AC(SMA) Dimensions in inches and (millimeters) MECHANICAL DATA Cass: JEDEC DO-214 AC, low profile molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band except bi-directional types Weight: 0.002 ounces, 0.064 gram Standard Packaging: 12mm tape per (EIA-481) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified Peak Pulse Power Dissipation at TA=25℃(NOTE1,2,5)Fig.1 Peak Forward Surge Current per Figure 5 (NOTE 3) Peak Pulse Current on 10/10000μs wave from (NOTE1,FIG.2) Steady Stage Power Dissipation (Note 4) Operating Junction and Storage Temperature Range Symbols PPPM IFSM IPPM PM(AV) TJ, TSTG Value Minimum 400 40.0 See Table 1 1.0 50 to + 150 Notes: 1. Non-repetitive current pulse, per Fog.3 and derated above TA=2...