Single-Pole Double-Throw (SPDT) switch
SA630
Single-Pole Double-Throw (SPDT) switch
Rev. 3 — 23 July 2014
Product data sheet
1. General description
The SA630...
Description
SA630
Single-Pole Double-Throw (SPDT) switch
Rev. 3 — 23 July 2014
Product data sheet
1. General description
The SA630 is a wideband RF switch fabricated in BiCMOS technology and incorporating on-chip CMOS/TTL compatible drivers. Its primary function is to switch signals in the frequency range DC to 1 GHz from one 50 channel to another. The switch is activated by a CMOS/TTL compatible signal applied to the enable channel 1 pin (ENCH1).
The extremely low current consumption makes the SA630 ideal for portable applications. The excellent isolation and low loss makes this device a suitable replacement for PIN diodes.
The SA630 is available in an 8-pin SO (surface-mounted miniature) package.
2. Features and benefits
Wideband (DC to 1 GHz) Low through loss (1 dB typical at 200 MHz) Unused input is terminated internally in 50 Excellent overload capability (1 dB gain compression point +18 dBm at 300 MHz) Low DC power (170 A from 5 V supply) Fast switching (20 ns typical) Good isolation (off channel isolation 60 dB at 100 MHz) Low distortion (IP3 intercept +33 dBm) Good 50 match (return loss 18 dB at 400 MHz) Full ESD protection Bidirectional operation
3. Applications
Digital transceiver front-end switch Antenna switch Filter selection Video switch FSK transmitter
NXP Semiconductors
SA630
Single-Pole Double-Throw (SPDT) switch
4. Ordering information
Table 1. Ordering information
Type number
Topside marking
Package Name Description
SA63...
Similar Datasheet