Solid State Relays
Solid State Relay
G3R-I/O
Compact SSRs for I/O Interface with High Dielectric Strength Requirements
• High-speed models...
Description
Solid State Relay
G3R-I/O
Compact SSRs for I/O Interface with High Dielectric Strength Requirements
High-speed models with optimum input ratings for a variety of sensors are available.
Input Modules and Output Modules that have the same form-factor as the G2R.
Using a coupler approved by VDE 0884 and assuring an I/O dielectric strength of 4 kV.
Incorporating an easy-to-see monitoring indicator. Approved by UL, CSA, and TÜV. (“-UTU” models)
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5)
■ Input Module
Isolation
Indicator
Photocoupler
Yes
Response speed
Logic level
Supply voltage Supply current
—
4 to 32 VDC
0.1 to 100 mA
High-speed (1 kHz)
Low-speed (10 Hz)
Rated input voltage
100 to 240 VAC 5 VDC 12 to 24 VDC 5 VDC 12 to 24 VDC
Model
G3R-IAZR1SN G3R-IDZR1SN
G3R-IDZR1SN-1
■ Output Module
Isolation Phototriac Photocoupler
Indicator Yes
Zero cross function
Yes
No
—
Rated output load
2 A at 100 to 240 VAC
2 A at 5 to 48 VDC 1.5 A at 48 to 200 VDC
Rated input voltage
5 to 24 VDC
Note: When ordering a UL, CSA and EN (TÜV) approved model, add “-UTU” to the model number as shown below: Example: G3R-OA202SZN-UTU DC5-24.
■ I/O Indication
I/O module classification and AC/DC use are indicated on the mark affixed to the top of the product.
Mark indication AC IN DC IN AC OUT DC OUT
Specification Input module, AC input Input module, DC input Output module, AC output Output module, ...
Similar Datasheet