Document
PRELIMINARY
www.DataSheet4U.com
SOLID STATE DEVICES, INC.
14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773
Designer's Data Sheet
FEATURES: 13.6 - 800 Volts Unidirectional in TO-257 Package Glass Passivated Junction, Epoxy Encapsulated Assembly Meets all Environmental Requirements of Mil-RPF-19500 Custom Configuration Available Reverse Polarity Available (Add Suffix "R") 150oC Maximum Operating Temperature TX and TXV Level Screening Available
APPLICATIONS: Voltage Sensitive Components Protection Protection against Power Interruption Lightning Protection
STA3KA13.6JE thru
STA3KA800JE
3,000 WATTS PEAK PULSE POWER
13.6 - 800 VOLTS UNIDIRECTIONAL TRANSIENT VOLTAGE
SUPPRESSOR
TO-257JE
Maximum Ratings
SYMBOL VALUE UNITS PACKAGE OUTLINE: TO-257JE
Stand off Voltage
VRWM 13.6-800 Volts
Steady State Power Dissipation PD
10 W
Peak Pulse Power @ 1.0 msec PPP 3,000 W
Peak Surge Current (8.3 ms Pulse, Half Sine Wave)
IFSM
200
A
Operating and Storage Temperature
Top, Tstg
-65 to +175
oC
Note: SSDI's Transient Voltage Suppressors offer standard Breakdown Voltage Tolerances of "10%(A) and "5%(B). For other Voltages and Voltage Tolerances, contact SSDI's Marketing Department.
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: TVS001B
STA3KA13.6JE thru
STA3KA800JEwww.DataSheet4U.com
PRELIMINARY
SOLID STATE DEVICES, INC.
14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773
Electrical Characteristics
PART NUMBER
BREAK DOWN (note 1)
Nominal Test Voltage Current
VBR
IBRT
MAX REVERSE STAND OFF
PEAK PULSE CLAMPING
Voltage
Reverse Leakage Current
@ Current tp = 1ms (note 2)
Voltage (max)
VRWM IR @VRWM
IPP
VC
10%
5%
Volts mA 10% 5%
:A
A Volts
STA3KA13.6JE STA3KA15JE STA3KA16.4JE STA3KA18.2JE STA3KA20JE
STA3KB13.6JE STA3KB15JE STA3KB16.4JE STA3KB18.2JE STA3KB20JE
13.6 15 16.4 18.2 20
10 11.00 10.60 10 12.10 12.80 10 13.26 14.04 1.0 14.74 15.56 1.0 16.2 17.1
1000 500 200 50 10
143 21.0 132 22.6 124 24.2 112 26.8 103 29.0
MAXIMUM TEMPERATURE COEFFICIENT
TC @25oC
%/ oC
0.057 0.061 0.065 0.068 0.073
STA3KA22JE STA3KA24JE STA3KA26JE STA3KA30JE STA3KA32JE
STA3KB22JE STA3KB24JE STA3KB26JE STA3KB30JE STA3KB32JE
22 24 26 30 32
1.0 17.84 18.8 1.0 19.44 20.4 1.0 21.0 22.2 1.0 24.2 25.6 1.0 25.8 27.2
5.0 5.0 5.0 5.0 5.0
96.0 31.2 90.0 33.4 82.0 36.4 71.0 42.4 67.0 45.0
0.075 0.076 0.081 0.084 0.086
STA3KA36JE STA3KA40JE STA3KA44JE STA3KA48JE STA3KA60JE
STA3KB36JE STA3KB40JE STA3KB44JE STA3KB48JE STA3KB60JE
36 40 44 48 60
1.0 29.0 30.6 1.0 32.4 34.2 1.0 35.6 37.6 1.0 38.8 41.0 1.0 48.6 50.2
5.0 5.0 5.0 5.0 5.0
57.2 52.4 54.0 55.4 49.0 61.2 45.0 66.4 36.0 82.8
0.088 0.090 0.092 0.094 0.097
STA3KA72JE STA3KA86JE STA3KA102JE STA3KA124JE STA3KA150JE
STA3KB72JE STA3KB86JE STA3KB102JE STA3KB124JE STA3KB150JE
72 86 102 124 150
1.0 59.2 61.6 1.0 69.6 73.6 1.0 82.6 87.2 1.0 100.4 106.0 1.0 120.4 128.2
5.0 5.0 5.0 5.0 5.0
30.0 98.8 25.3 118.6 21.4 140.2 17.7 170.0 14.6 206.0
0.099 0.101 0.102 0.104 0.105
STA3KA164JE STA3KA200JE STA3KA300JE STA3KA360JE STA3KA400JE
STA3KB164JE STA3KB200JE STA3KB300JE STA3KB360JE STA3KB400JE
164 200 300 360 400
1.0 132.8 140.2 1.0 162 171 1.0 242 256 1.0 292 308 1.0 324 342
5.0 5.0 5.0 5.0 5.0
13.3 226 11.0 274 7.2 414 6.1 492 5.5 548
0.105 0.106 0.108 0.108 0.108
STA3KA600JE STA3KB600JE 600 STA3KA800JE STA3KB800JE 800
% PEAK VALUE
100
90
80
70
60
50
40 30
tp
20
10
0
01
2
TIME (ms)
1.0 1.0
3
486 512 648 684
5.0 5.0
3.6 828 2.7 1096
0.110 0.110
Notes:
1. All voltages are measured with automated test set using 35
msec test time. Longer or shorter test times will have a
corresponding effect on the measured value due to the heat-
ing effects.
2. Pulse width (tP) is defined as the time from peak pulse current IPP to the point where peak pulse current decayed to 50% of rated IPP. (10:sec x 100:sec wave form as defined by R.E.A.)
3. All Ratings based on 25oC Case temperature.
4
.