Document
Elektronische Bauelemente
D20SB10 ~ D20SB100
100 V ~ 1000 V 20.0 Amp High Current Glass Passivated
Molding Single-Phase Bridge Rectifier
RoHS Compliant Product A suffix of “-C” specifies halogen-free and RoHS Compliant
FEATURES
Plastic Package has Underwriters Laboratory Flammability Classification 94V-0
This Series is UL listed under the Recognized Component index, file number E231047
Single-in-line package
High current capacity with small package
Superior thermal conductivity
High temperature soldering guaranted:
260°C / 10 seconds High IFSM
R
A
C J
D5-25SB
GB H F NK
O MD E
P
S LL
REF.
A B C D E G J F
Millimeter
Min.
29.7 19.7 4.4
Max.
30.3 20.3 4.8
17.0 18.0
0.6 0.8
5 REF.
3.4 3.8
3.3 3.7
REF.
K L N P O R S H
Millimeter
Min.
2.6 7.3 2.3
Max.
2.8 7.7 2.7
0.9 1.1
2.0 2.4
3 X 45°
9.8 10.2
10.8 11.2
MAXIMUM RATINGS (TA=25℃ unless otherwise noted)
PART NUMBERS
PARAMETERS
D20SB D20SB D20SB D20SB D20SB D20SB
SYMBOL 10 20 40 60 80 100
Maximum repetitive voltage
RBV RBV RBV RBV RBV RBV 2002S 2003S 2004S 2005S 2006S 2007S VRM 100 200 400 600 800 1000
Maximum DC reverse current at @TA=25°C
rated DC blocking voltage
@TA=125°C
Average rectified forward current 60Hz Sine wave Resistance load
@TC=87°C @TA=25°C
IR IO
10 500 20 (1)
3.5 (2)
Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load
IFSM
300
Maximum Instantaneous Forward Voltage @ 10.0A
VF
1.1
Dielectric strength terminals to case, AC 1 minute Current 1mA
Vdia
2.5
UNITS
V
A
A A V
KV
Maximum thermal on P.C.B without heat-sink Resistance per leg on AI plate heat-sink
RθJA RθJC
22 (2) 1.5 (1)
°C / W
Operating and Storage Temperature Range
TJ , TSTG
150 , -40 ~ 150
°C
Mounting torque
Tor Rating Torque:0.8N.m
N.m
Notes: (1) Unit case mounted on AI plate heat-sink (2) Unites mounted on P.C.B. without heat-sink (3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat
transfer with #6 screw {heat-sink size:12.7 * 10.2 * 7.6cm}
http://www.SeCoSGmbH.com/
06-Aug-2010 Rev. A
Any changes of specification will not be informed individually.
Page 1 of 2
Elektronische Bauelemente
CHARACTERISTIC CURVES
D20SB10 ~ D20SB100
100 V ~ 1000 V 20.0 Amp High Current Glass Passivated
Molding Single-Phase Bridge Rectifier
http://www.SeCoSGmbH.com/
06-Aug-2010 Rev. A
Any changes of specification will not be informed individually.
Page 2 of 2
.