Dual N-Channel Driver
NIMD6001N, NIMD6001AN
Dual N-Channel Driver with Diagnostic Output
60 V, 3 A, 110 mW
NIMD6001N/AN is a dual 3 Amp low-s...
Description
NIMD6001N, NIMD6001AN
Dual N-Channel Driver with Diagnostic Output
60 V, 3 A, 110 mW
NIMD6001N/AN is a dual 3 Amp low-side switch with an integrated common disable input and drain diagnostic output. Pulling the Disable pin low will override any applied gate voltages and turn off both FET switches. Should either Drain-Source voltage exceed approximately 50 V, a logic 1 (> 3 V) will be asserted on the Diagnostic/Feedback pin. Internal isolation diodes permit the Disable and Diagnostic/ Feedback pins of multiple devices to be interconnected in a “wired-OR” configuration without additional components.
Features
RDSON 110 mW Maximum at VGS = 10 V Avalanche Energy Specified Gate Drive Disable Input Drain-Source Voltage Diagnostic Feedback Output Electrically Isolated Drains for Low Crosstalk Internal Resistors Limit Peak Transient gate Current AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free and are RoHS Compliant
Applications
Automotive Injector Driver Solenoid / Relay Driver
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Drain−to−Source Voltage (DC, sustained)
Gate−to−Source Voltage
Continuous Drain Current VGS = 10 V, RqJA = 55°C/W VGS = 5.0 V, RqJA = 55°C/W
Single Pulse Drain Current Pulse duration = 80 ms
VDSS VGS ID
ID
60 "20
3.3 3.0 10
Vdc Vdc
A
A
Single Pulse Drain-to-Source Avalanche Energy VDD = 60 V; VGS = 10 V; IPK = 2.6 A; L = 76 mH; Start Tj = 25°C
EAS
258 mJ
Operating Junction Temperature
TJ ...
Similar Datasheet