85~265V AC Input LED Constant Current Driver
85~265V AC Input LED Constant Current Driver
LN2542
■ General Description
The LN2542 is a high voltage buck control IC...
Description
85~265V AC Input LED Constant Current Driver
LN2542
■ General Description
The LN2542 is a high voltage buck control IC for constant LED current regulation. The LN2542 operates constant off-time mode. It allow efficient operation of High Brightness (HB) LEDs from voltage sources ranging from 8VDC up to 450VDC or 110VAC/220VAC.
The LN2542 includes a PWM dimming input that can accept an external control signal with a duty ratio of 0 100% and a frequency of up to a few kilohertz, and the dimming also accept a 0-1.2V linear input signal. The RNTC pin can accept a 0-250mV Line Dimming input witch be used for temperature compensation of the LED current. LN2542 is available by SOP-8 packages.
■ Applications
DC/DC or AC/DC LED driver applications RGB backlighting LED driver General purpose constant current source Signal and decorative LED lighting
■ Typical Application Circuit
■ Features
Switch mode constroller for single switch LED Drivers Open loop peak current controller Wide Input range from 8VDC~450VDC or
110VAC/220AC Application from a few mA to more than 1A output Up to hundreds of LEDs Constant off-time operation Linear and PWM dimming capability Requires few external components for operation Temperature compensation to regulate LED current
■ Package
SOP-8
fuse AC220V
IN4007*4
10uF/400V
IN4007
IN4007
IN4007
10uF/400V
R1
10uF/16V
HER207 LEDs
5mH
LN2542 RNTC
VIN
DIM GATE
2N60
VREF
CS
R2 RNTC
TOFF
GND
Rcs
Rosc
Note: 1、R1 is base...
Similar Datasheet