NCP51190, NCV51190
1.5A DDR Memory Termination Regulator
The NCP/NCV51190 is a simple, cost−effective, high−speed linea...
NCP51190, NCV51190
1.5A DDR Memory Termination
Regulator
The NCP/NCV51190 is a simple, cost−effective, high−speed linear
regulator designed to generate the VTT termination voltage rail for DDR−I, DDR−II and DDR−III memory. The
regulator is capable of actively sourcing or sinking up to ±1.5 A for DDR−I, or up to ±0.5 A
for DDR−II /−III while regulating the output voltage to within
±30 mV. The output termination voltage is tightly regulated to track VTT =
(VDDQ / 2) over the entire current range. The NCP/NCV51190 incorporates a high−speed differential
amplifier to provide ultra−fast response to line and load transients. Other features include extremely low initial offset voltage, excellent load regulation, source/sink soft−start and on−chip thermal shut−down protection.
The NCP/NCV51190 features the power−saving Suspend To Ram (STR) function which will tri−state the
regulator output and lower the quiescent current drawn when the /SS pin is pulled low.
The NCP/NCV51190 is available in a DFN8 package.
Features
Generate DDR Memory Termination Voltage (VTT) For DDR−I, DDR−II, DDR−III Source / Sink Currents Supports DDR−I to ±1.5 A, DDR−II, DDR−III to ±0.5 A (peak) Integrated Power MOSFETs with Thermal Protection Stable with 10 mF Ceramic VTT Capacitor High Accuracy Output Voltage at Full−Load Minimal External Component Count Shutdown for Standby or Suspend to RAM (STR) mode Built−in Soft Start NCV Prefix for Automotive and Other Applications Requiring
Unique Si...