512-Kb SPI Serial CMOS EEPROM
EEPROM Serial 512-Kb SPI Automotive Grade 1
CAV25512
Description The CAV25512 is a EEPROM Serial 512−Kb SPI Automotive
...
Description
EEPROM Serial 512-Kb SPI Automotive Grade 1
CAV25512
Description The CAV25512 is a EEPROM Serial 512−Kb SPI Automotive
Grade 1 device internally organized as 64Kx8 bits. This features a 128−byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAV25512 device. The device features software and hardware write protection, including partial as well as full array protection.
On−Chip ECC (Error Correction Code) makes the device suitable for high reliability applications.
Features
Automotive AEC−Q100 Grade 1 (−40°C to +125°C) Qualified 10 MHz SPI Compatible 2.5 V to 5.5 V Supply Voltage Range SPI Modes (0,0) & (1,1) 128−byte Page Write Buffer Additional Identification Page with Permanent Write Protection Self−timed Write Cycle Hardware and Software Protection Block Write Protection
− Protect 1/4, 1/2 or Entire EEPROM Array
Low Power CMOS Technology 1,000,000 Program/Erase Cycles 100 Year Data Retention SOIC, TSSOP and WLCSP 8−lead Packages This Device is Pb−Free, Halogen Free/BFR Free, and RoHS
Compliant
VCC
SI
CS
WP
CAV25512
SO
HOLD SCK
VSS Figure 1. Functional Symbol
This document contains information on some products that are still under development. ON Semiconductor reserves the right to...
Similar Datasheet