3.3V Automotive Grade M-LVDS Driver Receiver
NBA3N200S
3.3 V Automotive Grade M-LVDS Driver Receiver
Description The NBA3N200S is a 3.3 V supply differential Multi...
Description
NBA3N200S
3.3 V Automotive Grade M-LVDS Driver Receiver
Description The NBA3N200S is a 3.3 V supply differential Multipoint Low
Voltage (M−LVDS) line Driver and Receiver for automotive applications. NBA3N200S offers the Type−1 receiver threshold at 0.0 V.
The NBA3N200S has Type−1 receivers that detect the bus state with as little as 50 mV of differential input voltage over a common−mode voltage range of −1 V to 3.4 V. Type−1 receivers have near zero thresholds (±50 mV) and exhibit 25 mV of differential input voltage hysteresis to prevent output oscillations with slowly changing signals or loss of input.
NBA3N200S supports Simplex or Half Duplex bus configurations.
Features
Low−Voltage Differential 30 W to 55 W Line Drivers and Receivers
for Signaling Rates Up to 200 Mbps
Type−1 Receivers Incorporate 25 mV of Hysteresis Controlled Driver Output Voltage Transition Times for Improved
Signal Quality
−1 V to 3.4 V Common−Mode Voltage Range Allows Data Transfer
With up to 2 V of Ground Noise
Bus Pins High Impedance When Disabled or VCC ≤ 1.5 V M−LVDS Bus Power Up/Down Glitch Free Operating range: VCC = 3.3 ±10% V( 3.0 to 3.6 V) Operation from –40°C to 125°C AEC−Q100 Qualified and PPAP Capable These are Pb−Free Devices
Applications
Low−Power High−Speed Short−Reach Alternative to TIA/EIA−485 Backplane or Cabled Multipoint Data and Clock Transmission Cellular Base Stations Central−Office Switches Network Switches and Routers Automotive
www.onsemi.com...
Similar Datasheet