NCV7710

NCV7710 Door-Module Driver-IC (Lock Driver-IC) The NCV7710 is a powerful Driver−IC for automotive body control systems. The IC is designed to control lock motor in the door of a vehicle. With the monolithic full−bridge driver stage, the IC is able to control lock motor. The NCV7710 is controlled thru a 24 bit SPI interface with in−frame response. Features Operating Range from 5.5 V to 28 V Two High−Side and Two Low−Side Drivers Connected as Half−bridges ♦ 2 Half−bridges Iload = 6 A; Rdson = 150 mW @ 25°C Programmable Soft−Start Function to Drive Loads with Higher Inrush Currents as Current Limitation Value Support of PWM Control Frequency Outside the Audible Noise Support of Active Freewheeling to Reduce Power Dissipation Multiplex Current Sense Analog Output for Advanced Load Monitoring Very Low Current Consumption in Standby Mode Charge Pump Output to Control an External Reverse Polarity Protection MOSFET 24−Bit SPI Interface ...