Double Hex Driver
NCV7708E
Double Hex Driver
The NCV7708E is a fully protected Hex−Half Bridge−Driver designed specifically for automotive...
Description
NCV7708E
Double Hex Driver
The NCV7708E is a fully protected Hex−Half Bridge−Driver designed specifically for automotive and industrial motion control applications. The six low and high side drivers are freely configurable and can be controlled separately. This allows for high side, low side, and H−Bridge control. H−Bridge control provides forward, reverse, brake, and high impedance states. The drivers are controlled via a standard SPI interface.
Features
Ultra Low Quiescent Current Sleep Mode Six Independent High−Side and Six independent Low−Side Drivers Integrated Freewheeling Protection (LS and HS) Internal Upper and Lower Clamp Diodes Configurable as H−Bridge Drivers 0.5 A Continuous (1 A peak) Current RDS(on) = 0.8 W (typ) 5 MHz SPI Control SPI Valid Frame Detection Compliance with 5 V and 3.3 V Systems Overvoltage Lockout Undervoltage Lockout Fault Reporting Current Limit Overtemperature Protection Internally Fused Lead in SOIC−28
Packaged for Better Thermal Performance
These are Pb−Free Devices*
Typical Applications
Automotive Industrial DC Motor Management
http://onsemi.com
SOIC−28 DW SUFFIX CASE 751F
MARKING DIAGRAM
NCV7708E AWLYYWWG
A = Assembly Location WL = Wafer Lot YY = Year WW = Work Week G = Pb−Free Package
PIN CONNECTIONS
OUTL5 OUTH5 OUTH4 OUTL4
VS2 GND GND GND GND VS1 OUTL3 OUTH3 OUTH2 OUTL2
1
OUTH6 OUTL6 SI SCLK CSB GND GND GND GND VCC SO EN OUTL1 OUTH1
*For additional information on our Pb−Free strategy and ...
Similar Datasheet