HIGH SENSITIVITY MICROPOWER UNIPOLAR HALL-EFFECT SWITCH
NEW PRODUCT
AH3360
HIGH SENSITIVITY MICROPOWER UNIPOLAR HALL-EFFECT SWITCH
Description
Pin Assignments
The AH3360 is...
Description
NEW PRODUCT
AH3360
HIGH SENSITIVITY MICROPOWER UNIPOLAR HALL-EFFECT SWITCH
Description
Pin Assignments
The AH3360 is a high sensitivity micro power unipolar hall effect switch IC with internal pull-up and pull-down capability. Designed for battery powered consumer such as cellular phones and portable PCs to home appliance and industrial equipment, the average supply current is only 4.3µA at 1.85V. To support portable equipment, the AH3360 can operate over the supply range of 1.6V to 3.6V, and uses a hibernating clocking system to minimize the power consumption. To minimize PCB space, the AH3360 is available in small and low profile SOT553, X1-DFN1216-4 and X2-DFN2015-6 packages.
The output is activated with a south pole of sufficient magnetic field strength. When the magnetic flux density (B) perpendicular to the package is larger than operate point (BOP), the output will be turned on (pulled low) and held until B is lower than release point (BRP). The output will remain off when there is no magnetic field.
Features
Unipolar Operation (South Pole to Part Marking Side) Supply Voltage of 1.6V to 3.6V High Sensitivity Micro Power Operation Chopper Stabilized Design Provides:
Superior Temperature Stability Minimal Switch Point Drift Enhanced Immunity to Physical Stress No External Pull-Up Resistors Required Good RF Noise Immunity -40°C to +85°C Operating Temperature High ESD Capability of 8kV Human Body Model Small and Low Profile X1-DFN1216-4, X2-DF...
Similar Datasheet