Digital Output Temperature Sensor
CAT34TS04
Digital Output Temperature
Sensor with On-board SPD
EEPROM
Description The CAT34TS04 is a combination Tempera...
Description
CAT34TS04
Digital Output Temperature
Sensor with On-board SPD
EEPROM
Description The CAT34TS04 is a combination Temperature Sensor (TS) and
4−Kb of Serial Presence Detect (SPD) EEPROM, which implements the JEDEC TSE2004av DDR4 specification and supports the Standard (100 kHz), Fast (400 kHz) and Fast Plus (1 MHz) I2C protocols.
The TS measures temperature at least 10 times every second. Temperature readings can be retrieved by the host via the serial interface, and are compared to high, low and critical trigger limits stored into internal registers. Over or under limit conditions can be signaled on the open−drain EVENT pin.
One of the two available 2−Kb SPD EEPROM banks (referred to as SPD pages in the TSE2004av specification) is activated for access at power−up. After power−up, banks can be switched via software command. Each of the four 1−Kb SPD EEPROM blocks can be Write Protected by software command.
Features
JEDEC TSE2004av Compliant Temperature Sensor Temperature Range: −20°C to +125°C DDR4 DIMM Compliant SPD EEPROM Supply Range: 1.7 V − 5.5 V (SPD EEPROM) and
2.2 V − 5.5 V (TS)
I2C / SMBus Interface Schmitt Triggers and Noise Suppression Filters on SCL and SDA
Inputs
16−Byte Page Write Buffer Low Power CMOS Technology 2 x 3 x 0.75 mm TDFN Package and 2 x 3 x 0.5 mm UDFN Package These Devices are Pb−Free and are RoHS Compliant
VCC
SCL A2, A1, A0
SDA
CAT34TS04
EVENT
VSS Figure 1. Functional Symbol
http://onsemi.com
TDFN−8 VP2 SUFFIX CASE 511AK
...
Similar Datasheet