+5 Volt Electronic Fuse
NIS5452 Series
+5 Volt Electronic Fuse
The NIS5452 series is a cost effective, resettable fuse which can greatly enhance...
Description
NIS5452 Series
+5 Volt Electronic Fuse
The NIS5452 series is a cost effective, resettable fuse which can greatly enhance the reliability of a hard drive or other circuit from both catastrophic and shutdown failures.
It is designed to buffer the load device from excessive input voltage which can damage sensitive circuits. It also includes an overvoltage clamp circuit that limits the output voltage during transients but does not shut the unit down, thereby allowing the load circuit to continue operation. Two thermal options are available, latching and auto−retry.
Features
Integrated Power Device Power Device Thermally Protected No External Current Shunt Required 40 mW Typical Internal Charge Pump Internal Undervoltage Lockout Circuit Internal Overvoltage Clamp ESD Ratings: Human Body Model (HBM); 2000 V
Machine Model (MM); 200 V
These are Pb−Free Devices and are RoHS Compliant
Typical Applications
Mother Board Hard Drives Fan Drives
www.onsemi.com
4.5 AMP, 5 VOLT ELECTRONIC FUSE
WDFN10 CASE 522AA
MARKING DIAGRAM
1
XXX AYWG
G
Pin 1−5 6 7 8 9 10 11 (flag)
Function SOURCE NC ILIMIT Enable/Fault dv/dt GND VCC
XXX = Specific Device Code A = Assembly Location Y = Year W = Work Week G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Features
Marking
Package
Shipping†
NIS5452MT1TXG
Thermal Latching Vclamp = 5.85 V, ILIM = 2.1 A @ 18 W
52
WDFN10 (Pb−Free)
3000 / Tape & Reel
NIS5452MT2TXG
Thermal Auto−Ret...
Similar Datasheet