ULTRA-SENSITIVE HALL EFFECT SWITCH
NOT RECOMMENDED FOR NEW DESIGN USE AH1808
AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH
Description
AH1801 is...
Description
NOT RECOMMENDED FOR NEW DESIGN USE AH1808
AH1801
MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH
Description
AH1801 is a Micropower, Ultra-sensitive Hall Effect Switch, which is with two Hall effect plates and a output driver, mainly designed for battery–operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). The total operation power is down to 24µW in the 3V supply.
Either north or south pole of sufficient strength will turn the output off. The output will be turned on under no magnetic field.
While the magnetic flux density (B) is larger than operate point (Bop), the output will be turned off, the output is held until B is lower than release point (Brp), then turned on.
Pin Assignments
( Top View )
GND 3.
2. Output 1. VDD
( Top View ) 3. GND
SC59
( Top View ) 6. NC 5. GND 4. NC
Features
Micropower Operation Operation with North or South Pole 2.5V to 5.5V Battery Operation Inverted Output-on without Magnet Present Chopper Stabilized
Superior Temperature Stability Extremely Low Switch-Point Drift Insensitive to Physical Stress Good RF Noise Immunity -40C to +85C Operating Temperature Low Profile 3 Pin SC59 (Commonly Known as SOT23 in Asia) and DFN2020-3, DFN2020-6 Packages ESD (HBM) > 5KV for DFN2020-3 and DFN2020-6
> 6KV for SC59 SC59, DFN2020-3 and DFN2020-6: Available in “Green”
Molding Compound (No Br, Sb)
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
...
Similar Datasheet