Dual USB High-Side Power Switch
AIC1518 Dual USB High-Side Power Switch
FEATURES
• 110mΩ (5V Input) High-Side MOSFET Switch. 1A Continuous Load Current...
Description
AIC1518 Dual USB High-Side Power Switch
FEATURES
110mΩ (5V Input) High-Side MOSFET Switch. 1A Continuous Load Current per Channel. 110µA Typical On-State Supply Current. 1µA Typical Off-State Supply Current. Current-Limit / Short Circuit Protection. Fault Flag with 3ms filter eliminates false assertions. (1518D) Thermal Shutdown Protection under Overcurrent Condition. Undervoltage Lockout Ensures that Switch is off at Start Up. Open-Drain Fault Flag. Slow Turn ON and Fast Turn OFF. Enable Active-High or Active-Low.
APPLICATIONS
USB Power Management. Hot Plug-In Power Supplies. Battery-Charger Circuit.
DESCRIPTION
The AIC1518 is a dual high-side power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. Both high-side switches are MOSFET with 110m Ω RDS(ON), which meets USB voltage drop requirements for maximum transmission wire length.
Multi-purpose open-drain fault flag output indicates over-current limiting, thermal shutdown, or undervoltage lockout for each channel. Output current is typically limited to 1.25A, and the thermal shutdown functions of the power switches independently control their channel under overcurrent condition.
Guaranteed minimum output rise time limits inrush current during hot plug-in as well as minimizing EMI and prevents the voltage at upstream port from dropping excessively.
Analog Integrations Corporation
Si-Soft Research Center 3A1, No.1, Li-Hsin Rd. I, Science Park, Hsinchu 300, Taiwan, R.O.C.
TEL: 886-3-577250...
Similar Datasheet