TECHNICAL DATA
TELEPHONE SPEECH NETWORK WITH DIALER INT`ERFACE
ILA1062/1062A
FEATURES
PIN CONNECTION
- Low DC line ...
TECHNICAL DATA
TELEPHONE SPEECH NETWORK WITH DIALER INT`ERFACE
ILA1062/1062A
FEATURES
PIN CONNECTION
- Low DC line voltage; operates down to 1.6V (excluding polarity guard)
- Voltage
regulator with adjustable static resistance - Provides a supply for external circuits - Symmetrical high-impedance inputs (64 kΩ) for dynamic, magnetic or piezo-electric microphones - Asymmetrical high-impedance input (32 kΩ) for electret
microphones - DTMF signal input with confidence tone
- Mute input for pulse or DTMF dialing - ILA1062: active HIGH (MUTE) - ILA1062A: active LOW (MUTE)
- Receiving amplifier for dynamic, magnetic or piezo-electric earpieces
- Large gain setting range on microphone and earpiece amplifiers
- Line loss compensation (line current dependent) for microphone and earpiece amplifiers - Gain control curve adaptable to exchange supply - DC line voltage adjustment facility
DESCRIPTION
LN 1 GAS1 2 GAS2 3
OR 4 GAR 5 MIC- 6 MIC+ 7 STAB 8
www.DataSheet4U.com
ILA1062
or BILTA11006622AA
16 SLPE 15 AGC 14 REG 13 VCC 12 MUTE 11 DTMF 10 IR 9 VEE
The ILA1062 and ILA1062A are integrated circuits that perform all speech and line interface functions required in fully
electronic telephone sets. They perform electronic switching between dialing and speech. The ICs operates at line voltage down to 1.6 V DC (with reduced performance) to facilitate the use of more telephone sets connected in parallel.
All statements and values refer to all versions unless otherwise specified. The IL...