ULTRA-SENSITIVE HALL EFFECT SWITCH
AiT Semiconductor Inc.
www.ait-ic.com
AH8102
HALL SWITCH MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH
DESCRIPTION
F...
Description
AiT Semiconductor Inc.
www.ait-ic.com
AH8102
HALL SWITCH MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH
DESCRIPTION
FEATURES
AH8102 is with two Hall effect plates and a CMOS
output driver, mainly designed for battery–powered,
hand-held equipment (such as Cellular and Cordless
Phone, PDA). E.g. as an On/Off switch in Cellular Flip-Phones, with battery operating voltages of 2.4V-5.5V. Either north or south pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field. While the magnetic flux density (B) is larger than operate point (Bop), the output will be turned on (low), the output is held until B is lower than release point (Brp) ,then turned
off.
Micropower operation Operation with North or South Pole 2.4V to 5.5V battery operation Chopper stabilized Superior temperature stability Extremely Low Switch-Point Drift Insensitive to Physical Stress Good RF noise immunity ESD > 4KV in human body mode Lead Free Finish Available in SOT-553 Package
The AH8102 is available in SOT-553 package.
ORDERING INFORMATION
APPLICATION
Cover switch in clam-shell cellular phones Cover switch in Notebook PC/PDA Contact-less switch in consumer products
Package Type
Part Number
SOT-553
AH8102CXR CX
AH8102CXVR
Note
V: Halogen free Package R: Tape & Reel
AiT provides all RoHS products
Suffix “ V” means Halogen free Package
TYPICAL APPLICATION
REV1.0
- MAY 2012 RELEASED -
-1-
AiT Semiconductor Inc.
www.a...
Similar Datasheet