Document
TMP93PW44A
Low-power CMOS
16-Bit Microcontroller
TMP93PW44ADF
1. Outline and Device Characteristics
The TMP93PW44A is OTP type MCU which includes 128-Kbyte one-time PROM. Using the adapter socket, you can write and verify the data for the TMP93PW44A. The TMP93PW44ADF has the same pin assignment as TMP93CW44 (Mask ROM type).
Writing the program to built-in PROM, the TMP93PW44A operates as the same way as the TMP93CW44.
Note:
The operation voltage of TMP93PW44A is VCC = 4.5 to 5.5 V though the operation voltage of TMP93CS44/45, TMP93PS44, TMP93CU44 and TMP93CW44 is VCC = 2.7 to 5.5 V. Especially, be careful when TMP93CU44, TMP93CW44 and TMP93PW44A are used. Please refer to the fourth chapter electric characteristic of each product for details.
MCU
TMP93PW44ADF
ROM
OTP 128 Kbytes
RAM
4 Kbytes
Package
P-QFP80-1420-0.80B
Adapter Socket
BM11152
030619EBP1
• The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own .