LC78213

Ordering number : ENA4817A LC78211, 78212, 78213 CMOS LSI Analog Function Switch http://onsemi.com Applications Function switching under serial data control in amplifiers, receivers, and other electronic equipment. Features  Two sets of eight (or in the LC78213, seven) built-in circuits with three switching configurations available based on differing internal connections.  Control according to serial data sent from a microprocessor, and easy connection to 5 V microprocessors.  Two identical products can be connected to a shared bus due to the provision of a select pin (S).  A reset pin that turns off all analog switches.  A ±20 V withstand voltage rating allows these products to provide a wide dynamic range. Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Maximum supply voltage Maximum input voltage VDD max VEE max VI1 VDD VEE DI, CL, CE, S, RES VI2 L1 to L8, R1 to R8, LCOM1 to LCOM4, RCOM1 to RCOM4 Analog switch potential difference when on VON With the switch on Ratings –0.3 to +20 –20 to +0.3 –0.3 to +20 VEE – 0.3 to VDD + 0.3 0.5 Unit V V V V V Allowable power dissipation Operating temperature range Storage temperature range Pd max Topr Tstg Ta ≤ 75°C 100 –30 to +75 –40 to +125 mW C C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Package Dim...