Digital-Output Magnetic Sensor
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TCS10SPU
Digital-Output Magnetic Sensor
TCS10SPU
Feature
Pu...
Description
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TCS10SPU
Digital-Output Magnetic Sensor
TCS10SPU
Feature
Push-Pull Output South-pole Detection
Marking
PA1
UFV Weight: 0.007 g (typ.)
Pin Assignment (Top View)
VCC (Note1) GND2 (Note2)
54
1
VOUT
23
GND1 NC
(Note2)
Function Table
Magnetic Flux Density
≥ BON
≤ BOFF
Output
L H
Note 1: It is recommended to add a capacitor of about 0.1 μF between VCC and GND. Note 2: The GND1 and GND2 pins should be tied to ground.
The GND2 pin is used as a test pin during production.
1 2008-09-08
Absolute Maximum Ratings (Ta = 25°C)
TCS10SPU
Characteristics
Symbol
Rating
Unit
Supply Voltage Output Voltage Output Diode Current Output Current Vcc/GND Current Power Dissipation Storage Temperature Range
VCC VOUT IOK IOUT ICC
PD Tstg
−0.5 to 6.0 −0.5 to 6.0
±10 ±5 ±10 200 −65 to150
V V mA mA mA mW °C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Operati...
Similar Datasheet