Driver circuit for photodiode array with amplifier
PHOTODIODE
Driver circuit for photodiode array with amplifier
C9118 series
Compact, easy-to-use driver circuit
C9118 s...
Description
PHOTODIODE
Driver circuit for photodiode array with amplifier
C9118 series
Compact, easy-to-use driver circuit
C9118 series CMOS driver circuit is designed for S8865 series photodiode array with amplifier. C9118 series operates a linear image sensor by just inputting two signals (M-CLK and M-RESET) and a signal +5 V supply. C9118 series is assembled on a compact board measuring 48 × 56 mm and allows downsizing of the measurement equipment. C9118 is intended for single use or parallel connections, while C9118-01 is suitable for cascade connections. C9118 series does not include S8865 series photodiode array with amplifier, so select the desired photodiode array and order it separately.
Features
l Single power supply (+5 V) operation l Operation with two input signals (M-CLK and M-RESET) l Compact: 48 × 56 mm l Assembled with low profile components
Applications
l Various types of image acquisition l Optical detection equipment
s Absolute maximum ratings (Ta=25 °C)
Parameter
Symbol
Supply voltage
Vcc
Digital input voltage
-
Operating temperature
Topr
Storage temperature
Tstg
*1: No condensation
s Specifications (Ta=25 °C)
Parameter
Rated voltage
Current consumption
Digital input
High level Low level
M-RESET pulse width (Low level)
M-CLK frequency
Digital rise/fall times
Data rate
Offset output
VIDEO saturation output *2
*2: From offset value.
Symbol -
+Is VIH VIL TpwstRESET1 fCLK tTLH/ tTHL fV Voffset Vast
Min. 4.9
2.0 0 10 40
1 -
PRELIMINARY DATA...
Similar Datasheet