400MHz to 450MHz ASK/OOK Receiver
MICRF229
400MHz to 450MHz ASK/OOK Receiver with Auto-Poll and RSSI
General Description
The MICRF229 is a 400MHz to 450M...
Description
MICRF229
400MHz to 450MHz ASK/OOK Receiver with Auto-Poll and RSSI
General Description
The MICRF229 is a 400MHz to 450MHz superheterodyne, image-reject, RF receiver with automatic gain control, ASK/OOK demodulator, and analog RSSI output. It only requires a crystal and a minimum number of external components to implement. The MICRF229 is ideal for low-cost, low-power, RKE, TPMS, and remote actuation applications.
The MICRF229 achieves 112dBm sensitivity at a bit rate of 1kbps with 1% BER. Eight demodulator filter bandwidths are selectable in binary steps from 1625Hz to 34kHz at 433.92MHz, allowing the device to support bit rates up to 20kbps. The device operates from a supply voltage of 3.5V to 5.5V, and typically consumes 6.0mA at 433.92MHz. The MICRF229 has a shutdown mode and sleep mode that reduce current to 0.5μA and 15μA respectively.
Datasheets and support documentation are available on Micrel’s web site at: www.micrel.com.
Features
112dBm sensitivity at 1kbps with 1% BER Auto-polling mode with bit checking Supports bit rates up to 20kbps at 433.92MHz 25dB image-reject mixer No IF filter required 60dB analog RSSI output range 3.5V to 5.5V supply voltage range 6.0mA supply current at 434MHz 15μA supply current in sleep mode 0.5μA supply current in shutdown mode 16-pin 4.9mm × 6.0mm QSOP package 40C to +105C temperature range 2kV HBM ESD rating
Applications
Automotive remote keyless entry (RKE) Long-range RF ID Remote fan/light cont...
Similar Datasheet