Filter
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA2009F,TA2009P
Filter IC For Σ−∆ Modulation System DA Conv...
Description
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA2009F,TA2009P
Filter IC For Σ−∆ Modulation System DA Converter
TA2009F/P
TA2009F, TA2009P are an analog filter IC for Σ−∆ modulation system DA converter. Using the TA2009F, TA2009P in combination the TC9237BF, TC9237BN (the Σ−∆ modulation system DA converter with a built−in digital filter), it is possible to construct a DA conversion system with less external parts.
Features
· Built−in CR for LPFs and output (differential) amplifiers for the left and right channel.
· Single power supply operation. · Noise distortion factor and S / N ratio are as follows
(when operating at +5V single power supply): Noise distortion factor: −93dB (typ.) S / N: 100dB (typ.)
Pin Connection (top view)
Weight SSOP16−P−225−1.00A: 0.14g (typ.) DIP16−P−300−2.54A: 1.00g (typ.)
1 2002-10-30
Block Diagram
TA2009F/P
Description Of Pin Functions
Pin No.
Symbol
I/O
Function & Operation
1
RI +
I
R channel operational amplifier forward input terminal. Connect to VRI.
2
GND
— Ground terminal.
3 RO O R channel analog output terminal.
4 VRI — Reference voltage terminal. (VCC / 2) 5 NC — Non-connecting terminal.
6 LO O L channel analog output terminal.
7 VCC — Supply voltage terminal.
8
LI +
I
L channel operational amplifier forward input terminal. Connect to VRI.
9
GND9
— Ground terminal for L channel reverse input side filter.
10 LI I L channel forward input terminal.
11 LI I L channel reverse input terminal.
12
GND1...
Similar Datasheet