LSI
DATA SHEET
Part No. Package Code No.
MN63Y1213
HSON008-A-0202
Established: Feb.2015
About this manual
■ Organizatio...
Description
DATA SHEET
Part No. Package Code No.
MN63Y1213
HSON008-A-0202
Established: Feb.2015
About this manual
■ Organization
These specifications provide important information for users of the MN63Y1213, including an overview and descriptions of functions.
■ Manual Configuration
Each section of this manual consists of a title, main text, and notes. The layout and definition of each section are shown below.
1.1 UART
This section describes the UART specification.
1.1.1 Communication Specifications
Table 1-1 shows the UART specification of this RFID.
Table 1-1 UART Communication Specification
Data transfer method Data rate
Character transmission
Other
DUMMYAsynchronous, half-duplex (Only IRQ notification allows fullduplex)
1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps LSB-first Data (8 bits) Start bit (1bit) Parity bit (1bit, even) Stop bit (1bit) See Note below.
No flow control signal (RTS/CTS)
Middle title Small title
Text
Note: In order to ensure the timing margin, when sending consequtive data from the host, use a 2-bit stop bit or set the interval between stop bit and next start bit to 1 bit or more.
Note
This is the Note. Please read.
■ Finding Desired Information This manual provides two methods for finding desired information quickly and easily.
1. Consult the table of contents at the front of the manual to locate desired titles.
2. Chapter names are located at the top outer corner of each page, and section titles are located at the bottom o...
Similar Datasheet
- MN63Y1208 LSI - Panasonic Semiconductor
- MN63Y1210 LSI - Panasonic Semiconductor
- MN63Y1213 LSI - Panasonic Semiconductor