A1362

A1360, A1361, and A1362 Low-Noise Programmable Linear Hall Effect Sensor ICs with Adjustable Bandwidth (50 kHz Maximum) and Analog Output Features and Benefits 1 mm case thickness provides greater coupling for current sensing applications Customer programmable offset and sensitivity Factory programmed 0% / °C sensitivity temperature coefficient Programmability at end-of-line Selectable unipolar or bipolar quiescent voltage levels Selectable sensitivity ranges between 0.7 and 1.4 mV/G (A1360), 1.4 to 4.5 mV/G (A1361) and 4.5 to 16 mV/G (A1362) Device bandwidth selectable under 50 kHz, via capacitor on FILTER pin Ratiometric sensitivity, quiescent voltage output, and clamps for interfacing with application DAC Temperature-stable quiescent voltage output and sensitivity Precise recoverability after temperature cycling Output voltage clamps provide short circuit diagnostic capabilities Wide ambient temperature range: – 40°C to 150°C Resistant to mechanical stress Package: 4 pin SIP (suffix KT) 1 mm case thickness Not to scale Description New applications for linear output Hall effect sensing, such as current measurement, require both high accuracy and increased sensor bandwidth. The Allegro® A1360, A1361, and A1362 programmable linear Hall effect sensor ICs are designed specifically to achieve both goals. Available in a through-hole SIP (single in-line package), the A136x Hall effect sensor ICs are sensitive and temperature-stable. The accuracy of thes...