QUAD BILATERAL SWITCH
UNISONIC TECHNOLOGIES CO., LTD CD4066
QUAD BILATERAL SWITCH
DESCRIPTION
The UTC CD4066 is a quad bilateral switch whi...
Description
UNISONIC TECHNOLOGIES CO., LTD CD4066
QUAD BILATERAL SWITCH
DESCRIPTION
The UTC CD4066 is a quad bilateral switch which can be applied for switching of analog signals and digital signals. When control input CONT is set to “H” level, the impedance between input and output of the switch becomes low and when it is set to “L” level, the impedance becomes high. It has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range.
FEATURES
* 15V Digital or ±7.5V Peak-to-Peak Switching * 85-Ω Typical On-State Resistance for 15V Operation * High noise immunity 0.45 VDD (typ.) * Matched “ON” resistance ∆RON=5Ω (typ.) over 15V signal input * High degree linearity 0.1% distortion (typ.)
@ fIS=1kHz, VIS=5VP-P, VDD-VSS=5V, RL=10kΩ * Extremely low “OFF” 0.1nA (typ.) switch leakage: @ VDD-VSS=10V, TA=25°C * Extremely high control input impedance 1012Ω (typ.) * Frequency response, switch “ON” 40 MHz (typ.)
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
CD4066L-D14-T
CD4066G-D14-T
Package DIP-14
CMOS IC
DIP-14
Packing Tube
www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd
1 of 8
QW-R502-739.A
CD4066
PIN CONFIGURATION
IN/OUT 1 OUT/IN 2 OUT/IN 3
IN/OUT 4 CONTROL B 5 CONTROL C 6
VSS 7
PIN DESCRIPTION
PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14
PIN NAME IN/OUT OUT/IN OUT/IN IN/OUT
CONTROL B CONTROL C
VSS IN/OUT OUT/IN OUT/IN IN/OUT CONTROL D CONTROL A
VDD
Signal IN/OUT A Signal OUT/IN A Signal OUT/IN B S...
Similar Datasheet