Digital-Output Magnetic Sensor
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TCS10DPU
TCS10DPU
Digital Output Magnetic Sensor
Feature
Pu...
Description
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TCS10DPU
TCS10DPU
Digital Output Magnetic Sensor
Feature
Push-Pull Output South-Pole or North-Pole Detection
UFV Weight: 0.007 g (typ.)
Marking
PA3
Pin Assignment (top view)
Function Table
VCC (Note 1) GND2 (Note 2)
54
Magnetic Flux Density
≥ BON ≤ BOFF
Output
L H
123
VOUT GND1 NC
(Note 2)
Note 1: It is recommended to add a capacitor of about 0.1 μF between VCC and GND. Note 2: The GND1 and GND2 pins should be tied to ground.
The GND2 pin is used as a test pin during production.
1 2009-01-30
Absolute Maximum Ratings (Ta = 25°C)
TCS10DPU
Characteristics
Symbol
Rating
Unit
Supply Voltage Output Voltage Output Diode Current Output Current Vcc/GND Current Power Dissipation Storage Temperature Range
VCC VOUT IOK IOUT ICC
PD Tstg
−0.5 to 6.0 −0.5 to 6.0
±10 ±5 ±10 200 −65 to 150
V V mA mA mA mW °C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rat...
Similar Datasheet