AHF2
SMALL, HIGHLY RELIABLE TIP SENSOR CONTAINING
A PHOTO SENSOR
AHF2 (TIP) SWITCHES
Compliance with RoHS Directive
...
AHF2
SMALL, HIGHLY RELIABLE TIP SENSOR CONTAINING
A PHOTO SENSOR
AHF2 (TIP) SWITCHES
Compliance with RoHS Directive
FEATURES
Realizes miniaturization of equipment and spaces saving. Size of body: 9.5×9.5×9.3 mm The contact type is equivalent to normally closed contacts, which satisfies the PL Act. The internal sphere can be used over an operation angle of 360 degrees in the circumferential direction. There are three standard terminal profiles which can be selected according to the mounting direction of the PCB. The terminals are tin-plated for longterm solderability.
TYPICAL APPLICATIONS
Gas heaters Electric fans Water vallet Infrared treatment device Electric pots with warming function
ORDERING INFORMATION
Mounting direction Part No.
Vertical mounting AHF21
Horizontal mounting AHF22
Reverse mounting AHF23
PCB mounting condition
Remark: Standard Packaging: Tube 50 pcs.
CONTACT TYPE
Normally closed type (The photo
transistor is ON when the sensor is being used.)
APPLICABLE CIRCUIT
Refer to the dimensional diagram for the terminal Nos. VCC = 5 V R2 = 100 kΩ Forward current, IF, of the LED: 19 mA (VCC = 5 V, R1 = 200 Ω) Forward voltage, VF, of the LED: Typ = 1.2 V
Terminal No. 2
IF
Terminal No. 1
R1
(VCC)
VCC R2 Terminal No. 3 VO Tip switch
Terminal No. 4
BASIC CHARACTERISTICS
For Ta = 25°C and applicable circuit conditions 1) Operation characteristics (Operation speed 6 degrees/second) Operation angle (Output: VOL → VOH): 25 to 60...