Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Designer’s Data Sheet
FEATURES:
• Ultra Fast Recovery: 60nsec Maximum • PIV to 3500 Volts • Hermetically Sealed • Void-Free Construction • Metallurgically Bonded • 175°C Maximum Operating Temperature • Micro Miniature Package • TX, TXV, and Space Level Screening Available
SGB10UF and
SGB35UF
60 mA 1000 - 3500 VOLTS
60 nsec HIGH VOLTAGE
RECTIFIER
AXIAL
ELECTRICAL CHARACTERISTICS
Part Number
Symbol Units
Peak Inverse Voltage
PIV
Volts
Average Rectifier Current
I0
mA
Maximum Reverse Current
IR @ PIV
µA
Maximu m
Forward Voltage
VF 2/
Volts
Conditions
25°C 100°C 25°C 100°C 25°C
SGB10UF 1000 60 45 0.1 10 SGB15UF 1500 60 45 0.1 10 SGB20UF 2000 60 45 0.1 10 SGB25UF 2500 60 45 0.1 10 SGB30UF 3000 60 45 0.1 10 SGB35UF 3500 60 45 0.1 10
9.5 9.5 9.5 9.5 9.5 9.5
Maximum Surge Current
(1 Cycle) IFSM
Amps
25°C
5 5 5 5 5 5
Maximum Reverse Recovery Time
tRR 5/ nsec
25°C
60 60 60 60 60 60
Maximum Junction Capacitance
CJ
pF
VR = 100V fT = 1MHZ
1.0 1.0 1.0 1.0 1.0 1.0
Typical Thermal Impedance
θJL °C/W
L = 1/4"
185 185 185 185 185 185
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RV0003E
DOC
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
PACKAGE OUTLINE: AXIAL RECTIFIER
SGB10UF and
SGB35UF
DIMENSIONS DIM MIN MAX
A -- .150” B -- .090” C 1.00” -D .022” .028”
NOTES:
1. Operating and testing over 10,000 V/inch may require encapsulation or immersion in suitable dielectric material. 2. IF = I0; Maximum forward voltage measured with instantaneous forward pulse of 300msec minimum. 3. Maximum lead temperature for soldering is 250oC, 3/8" from case for 5 sec maximum. 4. Operating and Storage temperature: -65 to +175o C. 5. Reverse Recovery Test Conditions: IF = 50mA, IR = 100mA, IRR = 25mA, TA = 25oC. 6. Consult manufacturing for operating curves.
NOTE: All specifications are subject to change without notification. SCD's for these devices sh ould be reviewed by SSDI prior to release.
DATA SHEET #: RV0003E
DOC
.