Document
TO:
File No. Issue Date: Revision Date:
PN-RD-0031A
2012 (Y)11 (M)05 (D)
《 · 》 New Revision
Product Specification
Product
TFT-LCD Open cell
Model
LC215DT5A
【】
※ 、 18 。 ,。
※ This Product Specification have 18 pages including the coversheet and Appendices. Please negotiate the objection point before purchase order.
CEC PANDA GROUP
NANJING CEC PANDA LCD TECHNOLOGY CO., LTD. R&D CENTER, DESIGN INTEGRATION SECTION.
PANDA
LC215DT5A Specification Version V1.0
REVISION HISTORY
- CONTENTS -
--------------------------------------------------------3
1. GENERAL DESCRIPTION
1.1 OVERVIEW 1.2 CHARACTERISTICS
--------------------------------------------------------4
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
--------------------------------------------------------4
3. ELECTRICAL CHARACTERISTICS
3.1 ABSOLUTE MAXIMUN RATING 3.2 CONTROL CIRCUIT DRIVING
--------------------------------------------------------5
4. INPUT TERMINAL PIN ASSIGNMENT
4.1 TFT LCD OPEN CELL 4.2 BLOCK DIAGRAM (OPEN CELL) 4.3 LVDS INTERFACE 4.4 COLOR DATA INPUT ASSIGNMENT
--------------------------------------------------------7
5. INTERFACE TIMING
5.1 INPUT SIGNAL TIMING SPECIFICATIONS
-------------------------------------------------------11
6. OPTICAL CHARACTERISTICS
6.1 OPTICAL SPECIFICATION
7. DEFINITIONS OF LABELS
7.1 MULTI-CELL LABAL 7.2 OPEN-CELL LABEL 7.3 CELLBOX LABEL
-------------------------------------------------------12 -------------------------------------------------------14
8. Packing
8.1 PACKING SPECIFICATIONS 8.2 PACKING METHOD
-------------------------------------------------------15
9. PRECAUTIONS
-------------------------------------------------------15
10. RELIABILITY TEST ITEMS
-------------------------------------------------------17
11. MECHANICAL DRAWING
-------------------------------------------------------17
2
PANDA
LC215DT5A Specification Version V1.0
REVISION HISTORY
MODEL NO: LC215DT5A
DATE
NO. REVISED No. PAGE
2012/11/05 PN-RD-0031A
V1.0
SUMMARY
1st issue
NOTE
Final
3
PANDA
LC215DT5A Specification Version V1.0
1. GENERAL DESCRIPTION
1.1 OVERVIEW This module is color active matrix LCD Open-cell incorporating amorphous silicon TFT (Thin Film
Transistor). It is composed of a color TFT-LCD panel, driver ICs, PWB. Graphics and texts can be displayed on a 1920×RGB×1080 dots panel with about 16.7M colors (R/G/B 6bits+Hi FRC data in each color) by using LVDS(Low Voltage Differential Signaling) to interface, +5V of DC supply voltage.
1.2 CHARACTERISTICS
CHARACTERISTICS ITEMS Screen Diagonal [in]
Pixels [lines]
Active Area [mm]
Pixel Pitch [mm]
Pixel Arrangement
Weight [g] Physical Size(COF/PWB included) Multi-cell glass Size [mm] Display Mode Surface treatment (Without the protection film)
[mm]
SPECIFICATIONS 21.5” 1920Ø 1080 476.64 (H) x 268.11 (V) 0.24825 (H) x 0.24825 (V) RGB vertical stripe 585 487.54(H) x 335.81(V) x 3(D) Typ. 487.54(H) x 282.91(V) x 1.83(D) Typ Normally White
Anti-glare,3H
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Symbol
Storage Temperature Operating Ambient Temperature Altitude Operating Altitude Storage
TST TOP A OP A ST
Storage Condition: With shipping package.
Value Min. Max. -20 +60
0 50 0 5000 0 12000
Shelf life: one year
[Note 1] Temperature and relative humidity range is shown in the figure below.
*1) 80 %RH Max. (Ta ≦ 40 ºC).
*2) Wet-bulb temperature should be 40 ºC Max. (Ta > 40 ºC).
Unit Note
ºC [Note 1,3] ºC [Note 1,2,3] M [Note 3] M [Note 3]
*3) No condensation.
4
PANDA
LC215DT5A Specification Version V1.0
[Note 2] The maximum operating temperature is based on the test condition that the surface temperature of display area is less than or equal to 50ºC with LCD module alone in a temperature controlled chamber. Thermal management should be considered in your product design to prevent the surface temperature of display area from being over 60ºC. The range of operating temperature may degrade in case of improper thermal management in your product design.
[Note 3] The rating of environment is base on LCD module. Leave LCD cell alone, this environment condition can’t be guaranteed. Except LCD cell, the customer has to consider the ability of other parts of LCD module and LCD module process.
3. ELECTRICAL CHARACTERISTICS
3.1 Absolute Maximum Rating
Parameter
Symbol Condition
Ratings
Unit Remark
+5V supply voltage
VCC
Ta=25℃
0~+6
V
Storage temperature
Tstg -
-20~+60
℃
Operation temperature
Topa
-
0~+50
℃
3.2 Control circuit driving Parameter
+5V supply voltage
Supply voltage
Current dissipation
Permissible input ripple voltage
Differential Input High Threshold Voltage Low
Input Differential Voltage Differential Input Common Mode Voltage
Power consumption
Symbol Min
VCC
4.5
ICC —
IRush —
VRP
—
VTH
—
VTL -100
∣VID∣ 100
VCM 1.0
P—
Typ Max Unit Remark
5.0 5.5 V
820 900 mA
—3
A
[Note 1] VCC=5.0V,60Hz Black Pattern
[Note 2]
— 100 mVp-p VCC.