DatasheetsPDF.com

AA084VB02 Dataheets PDF



Part Number AA084VB02
Manufacturers Mitsubishi
Logo Mitsubishi
Description TFT-LCD MODULE
Datasheet AA084VB02 DatasheetAA084VB02 Datasheet (PDF)

ECR # REV. HIST. A DESCRIPTION First Release APPROVED Ion Cenuse DATE 12/12/99 TECHNICAL SPECIFICATION AA084VB02 8.4-INCH TFT-LCD MODULE FOR INDUSTRIAL APPLICATIONS APPROVALS MELA ENG. MELA MKTG. ION CENUSE DALE MAUNU DATE DEC. 3RD, ‘99 MITSUBISHI/ADI SIZE A MITSUBISHI ELECTRIC SPECIFICATION AA084VB02 MITSUBISHI ELECTRIC TFT-LCD MODULE 8.4-INCH VGA COLOR AA084VB02 REV. A SHEET 1 OF 21 TABLE OF CONTENTS PARAGRAPH NUMBER ITEM COVER SHEET TABLE OF CONTENTS 1 OVERVIEW 2 ABSO.

  AA084VB02   AA084VB02


Document
ECR # REV. HIST. A DESCRIPTION First Release APPROVED Ion Cenuse DATE 12/12/99 TECHNICAL SPECIFICATION AA084VB02 8.4-INCH TFT-LCD MODULE FOR INDUSTRIAL APPLICATIONS APPROVALS MELA ENG. MELA MKTG. ION CENUSE DALE MAUNU DATE DEC. 3RD, ‘99 MITSUBISHI/ADI SIZE A MITSUBISHI ELECTRIC SPECIFICATION AA084VB02 MITSUBISHI ELECTRIC TFT-LCD MODULE 8.4-INCH VGA COLOR AA084VB02 REV. A SHEET 1 OF 21 TABLE OF CONTENTS PARAGRAPH NUMBER ITEM COVER SHEET TABLE OF CONTENTS 1 OVERVIEW 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL CHARACTERISTICS 4 INTERFACE PIN CONNECTION 5 INTERFACE TIMING 6 BLOCK DIAGRAM 7 MECHANICAL SPECIFICATION 8 OPTICAL CHARACTERISTICS 9 RELIABILITY TEST CONDITIONS 10 LIFE TIME OF THE BACKLIGHT LAMP 11 INSPECTION STANDARDS 12 HANDLING PRECAUTIONS FOR TFT-LCD MODULES PAGE 1 2 3 4 4, 5 6, 7 8, 9, 10 11 12, 13, 14 15, 16 17 18 19 20, 21 SIZE A MITSUBISHI ELECTRIC SPECIFICATION AA084VB02 REV. A SHEET 2 OF 21 1. OVERVIEW 1.1. Description: AA084VB02 is a 8.4-inch color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight. By applying 6 bit digital data 640 x 480, 262K – color images are displayed on the 8.4-inch diagonal screen. Input power voltage is 3.3 V (does not includes power for the backlight). Both 3.3VCMOS and 5.0V-CMOS voltage levels are acceptable for logic input voltage. Inverter for backlight is not included in this module. 1.2. General specifications summary table: ITEM Display Area (mm) Number of Pixels Pixel Pitch (mm) Color Pixel Arrangement Display Mode Number of colors Wide Viewing Angle Technology Optimum Viewing Angle (Contrast Ratio) Brightness (cd/m2) Power Consumption (W) Module Size (mm) Module Weight (g) Backlight Unit SPECIFICATION 170.9 X 128.2 (8.4-inch diagonal) 640(H) X 480(V) 0.267(H) X 0.267 (V) RGB Vertical Stripe Normally White 262K Optical Compensation Film 12 O'clock 350 5.4 221.0(W) X 152.4(H) X 10.58 (D) 420 CCFL, Two Lamps, Replaceable 1.3. Product Disclaimer The LCD products listed in this document are not suitable for safety related applications that do not have redundant back-up system(s). In other words, these LCD products are not designed for use as a single source safety related application, and therefore, are not recommended for applications in which human life and/or environment may be affected in the event of the failure of the LCD product. More specifically, if there is no back-up system or product in place that will continue operating the system, the LCD products should not be used in such things as: (i) aircraft navigation or aerospace equipment; (ii) nuclear reactor control systems; (iii) any application where failure or inaccuracy might cause death or personal injury (e.g., life support systems); or (iv) military and submarine critical systems. The LCD products are designed for typical industrial applications such as, but not are limited to the following: computers, office equipment, industrial controllers, audio and visual equipment, test and measurement devices, communication equipment, point of sale, medical imaging and automotive and various other consumer products. If there are any questions regarding the use, ability or application of these LCD products, please contact an authorized sales representative. SIZE A MITSUBISHI ELECTRIC SPECIFICATION AA084VB02 REV. A SHEET 3 OF 21 2. ABSOLUTE MAXIMUM RATINGS 2.1. Environmental conditions: humidity ≤85% RH, no condensation 2.2. Summary Table: ITEM Power Supply Voltage for LCD Logic Input Voltage Operating Temperature Storage Temperature SYMBOL VCC VIN Top Tstg MIN –0.3 0 0 –20 MAX 5.5 7 50 60 3. ELECTRICAL CHARACTERISTICS 3.1. Conditions: TFT-LCD module ambient temperature is 25°C 3.2. Summary table: UNIT V V °C °C ITEM Power Supply Voltage for LCD* Power Supply Current for LCD* Permissive Input Ripple Voltage Logic Input High Voltage Low SYMBOL VCC ICC VRP VLH VLL Note * : See paragraph 3.4 MIN 3.0 2.4 0.0 TYP 3.3 240 MAX 3.6 400 100 5.5 0.8 UNIT V COMMENTS (Note) mA (Note) mVp-p VCC=+3.3V V V 3.3. 3.3.1. 3.3.2. 3.3.3. Backlight The table below shows data for one lamp only. The TFT-LCD module has two identical lamps operated independently. Operation of both lamps is required in order to meet all the parameters in the AA084VB02 specification. ITEM Lamp Voltage Lamp Current Lamp Starting Voltage SYMBOL VL IL VS MIN 980 TYP 465 5.0 * MAX UNIT V mA V Note * : For typical luminance of 350cd/m2 SIZE A MITSUBISHI ELECTRIC SPECIFICATION AA084VB02 REV. A SHEET 4 OF 21 3.4. 3.4.1. Notes VCC turn-on conditions : t1 ≤ 10ms 0 < t2 ≤ 50ms 0 < t3 ≤ 50ms 3.0V 0.3V t1 t2 VCC Data 3.0V t3 3.4.2. VCC-dip conditions : 2.4V ≤ VCC < 3.0V and td ≤ 10ms VCC < 2.4V VCC-dip conditions should also follow the VCC turn-on conditions. VCC 3.0V td 2.4V 3.4.3. 3.4.4. Test condition for ICC Typical: 64 gray-bar pattern 480 line mode VCC = +3.3V Test conditions for ICC (.


WM-61B AA084VB02 AA104VB04


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)