1A Single Phase D.I.L. Rectifier Bridge
Bulletin U2788 rev. G 04/03
DF SERIES
1A Single Phase D.I.L. Rectifier Bridge
Features
• Glass passivated chips • Lea...
Description
Bulletin U2788 rev. G 04/03
DF SERIES
1A Single Phase D.I.L. Rectifier Bridge
Features
Glass passivated chips Leads on standard 0.1" grid Suitable for automatic insertion High surge current capability Fully characterised data Wide temperature range Surface mount option Lead free terminals solderable as per
MIL-STD-750 Method 2026 High temperature soldering guaranteed 260°C/8-10 secs Polarity symbols marked on the case UL E160375 approved
~ ~
+ IO(av) = 1.0 A
IO(av) -
VRRM range
50 to 1000V
Description
The DF Series of Single Phase Rectifier Bridges consists of four silicon junctions encapsulated in a 4 pin D.I.L. package. These devices are intended for general use in industrial and consumer equipment.
Electrical Specification
IO Maximum DC output current
IFSM Maximum peak one cycle, non-repetitive surge current
I2t Maximum I2t capability for fusing
I2√t VFM IRM f VRRM
Maximum I2√t capability for fusing Maximum peak forward voltage per diode Typical peak reverse leakage per diode Operating frequency range Maximum repetitive peak reverse voltage range
DF...
1.0 0.8 30 31
4.5 4.1 6.4 5.8 64
Units
A A A A
A2s A2s A2s A2s A2√s
Conditions
Tamb = 40oC, Resistive or inductive load
Tamb = 40oC, Capacitive load
t = 10ms, 20ms
Following any rated
t = 8.3ms, 16.7ms load condition and with
t = 10ms t = 8.3ms t = 10ms t = 8.3ms
rated VRRM reapplied
Initial TJ = TJ max 100% VRRM reapplied Initial TJ = TJ max no voltage reapplied
t = 0.1 to 10ms, ...
Similar Datasheet