Document
Global LCD Panel Exchange Center
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Jan. 16, 2005 Model No.: N121I3 -L07
Approval
- CONTENTS -
REVISION HISTORY
-------------------------------------------------------
1. GENERAL DESCRIPTION 1.1 OVERVIEW 1.2 FEATURES 1.3 APPLICATION 1.4 GENERAL SPECIFICATIONS 1.5 MECHANICAL SPECIFICATIONS
-------------------------------------------------------
2. ABSOLUTE MAXIMUM RATINGS 2.1 ABSOLUTE RATINGS OF ENVIRONMENT 2.2 ELECTRICAL ABSOLUTE RATINGS 2.2.1 TFT LCD MODULE 2.2.2 BACKLIGHT UNIT
-------------------------------------------------------
3. ELECTRICAL CHARACTERISTICS 3.1 TFT LCD MODULE 3.2 BACKLIGHT UNIT
-------------------------------------------------------
4. BLOCK DIAGRAM 4.1 TFT LCD MODULE 4.2 BACKLIGHT UNIT
-------------------------------------------------------
5. INPUT TERMINAL PIN ASSIGNMENT 5.1 TFT LCD MODULE 5.2 BACKLIGHT UNIT 5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL 5.4 COLOR DATA INPUT ASSIGNMENT 5.5 EDID DATA STRUCTURE 5.6 EDID SIGNAL SPECIFICATION
-------------------------------------------------------
6. INTERFACE TIMING 6.1 INPUT SIGNAL TIMING SPECIFICATIONS 6.2 POWER ON/OFF SEQUENCE
-------------------------------------------------------
7. OPTICAL CHARACTERISTICS 7.1 TEST CONDITIONS 7.2 OPTICAL SPECIFICATIONS
-------------------------------------------------------
8. PRECAUTIONS 8.1 HANDLING PRECAUTIONS 8.2 STORAGE PRECAUTIONS 8.3 OPERATION PRECAUTIONS
-------------------------------------------------------
9. PACKING 9.1 CARTON 9.2 PALLET
-------------------------------------------------------
3 4
5
7 11 12
20 22 25 26
10. DEFINITION OF LABELS 10.1 CMO MODULE LABEL 10.2 CARTON LABEL
-------------------------------------------------------
28
2 / 30
Version 3.0 One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Jan. 16, 2005 Model No.: N121I3 -L07
Approval
REVISION HISTORY
Version
Date
Page (New)
Section
Description
Ver 3.0 Jan. 16,’06 All
All Approval specification first issued.
3 / 30
Version 3.0 One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Jan. 16, 2005 Model No.: N121I3 -L07
Approval
1 GENERAL DESCRIPTION
1.1 OVERVIEW N121I3 -L07 is a 12.1” TFT Liquid Crystal Display module with single CCFL Backlight unit and 20 pins
LVDS interface. This module supports 1280 x 800 Wide-XGA mode and can display 262,144 colors. The optimum viewing angle is at 6 o’clock direction. The inverter module for Backlight is not built in.
1.2 FEATURES - Thin and light weight - WXGA (1280 x 800 pixels) resolution - 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock - Meet RoHS requirement
1.3 APPLICATION - TFT LCD Notebook
1.4 GENERAL SPECIFICATI0NS
Item Active Area Bezel Opening Area Driver Element Pixel Number Pixel Pitch Pixel Arrangement Display Colors Transmissive Mode Surface Treatment
Specification 261.12 (H) x 163.2 (V) (12.1” diagonal)
264.12 (H) x 166.2 (V) a-si TFT active matrix 1280 x R.G.B. x 800 0.204 (H) x 0.204 (V)
RGB vertical stripe 262,144
Normally white Hard coating (3H), glare type
Unit mm mm
pixel mm
color
-
Note
(1)
-
1.5 MECHANICAL SPECIFICATIONS
Item Horizontal(H)
Module Size Vertical(V) Depth(D)
Weight
Min. 275.3 177.4
-
Typ. 275.8 178
4.9 260
Max. 276.3 178.6
5.2 275
Unit Note mm mm (1) mm
g-
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
4 / 30
Version 3.0 One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Jan. 16, 2005 Model No.: N121I3 -L07
Approval
2 ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Symbol
Storage Temperature Operating Ambient Temperature Shock (Non-Operating) Vibration (Non-Operating)
TST TOP SNOP VNOP
Note (1) (a) 90 %RH Max. (Ta Љ 40 ºC).
Value Min. Max. -20 +60
0 +50 - 200/2 - 1.5
Unit
ºC ºC G/ms G
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max.
Relative Humidity (%RH)
100 90
80
Note
(1) (1), (2) (3), (5) (4), (5)
60 Operating Range
40
20
10 Storage Range
-40 -20
0 20 40 60 80 Temperature (ºC)
Note (3) 1 time for ± X, ± Y, ± Z. for Condition (200G / 2ms) is half Sine Wave,. Note (4) 10 ~ 500 Hz, 30 min/cycle,1cycles for each X, Y, Z axis. Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid
enough so that the module would not be twisted or bent by the fixture. The fixing condition is shown as below:
At Room Temperature
LCD Mo.