30K6A1IC

BetaTHERM Sensors BetaCurve Interchangeable Thermistor Series II BetaCurve Interchangeable Thermistor Series II . Thermistor Configuration 30 AWG Sliver Plated Copper Lead Wires With Etched TFE Telfon Insulation, Thermally Conductive Epoxy Coating 12.7mm +/-3.3mm (0.50Ó +/-0.13Ó) 76.2mm +/-3.3mm (3.00Ó +/-3.13Ó) 2.413mm (0.095Ó) Max. Dia. Example: BetaCURVE Series II Part Number 10K 3 A 1 I A Tolerance Classification Insulated Lead Wires BetaCURVE Series Epoxy Coated Material Curve # Resistance Value @ 25oC Applications ¥ Temperature sensing, control and compensation. ¥ P.C. board mounting for over temperature protection. ¥ Automotive car seat heater control and engine management. ¥ Assembly into probes for a wide variety of applications in industrial temperature control and instrumentation. Features ¥ Rapid Time Response (1 second typical in liquids). ¥ DC (Dissipation Constant) = 0.85mW/ oC typical in still air at 25oC. ¥ Min./Max. Temperature Exposure = -80 to 150oC. ¥ Available in custom probe assemblies. ¥ Proven Stability and Reliability. ¥ Teflon Insulated lead wires. ¥ Choice of 4 temperature tolerance classifications: Tolerance Code: A B C D Specification: +/-0.1oC, 0oC to 70oC +/-0.2oC, 0oC to 70oC +/-0.5oC, 0oC to 70oC +/-1.0oC, 0oC to 70oC Similar to the BetaCURVE Thermistor Series I, the Series II thermistors are small epoxy coated devices. The same quality thermistor elements are used during assembly. Series II are manufactured using 30...