LK520D3LZ17

RECORDS OF REVISION MODEL No. : LK520D3LZ17 SPEC No. : LD-19X10 SPEC No. LD-19X10 DATE 2007.10.23 REVISED PAGE No. SUMMARY Changed Contents from LK520D3LZ18 - Adjusting Color Tracking to be flat - Changing input signals to 10bit (8bit+2bit FRC) NOTE 1st Issue 1. Application This specification applies to the color 52.0” TFT-LCD module LK520D3LZ17. LD- 19X10-1 * These specification sheets are proprietary products of SHARP CORPORATION (“SHARP”) and include materials protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. * In case of using the device for applications such as control and safety equipment for transportation (aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment which require higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and redundant system design should be taken. * Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications, telecommunication equipment (trunk lines), nuclear power control equipment and medical or other equipment for life support. * SHARP assumes no responsibility for any damage resulting from the use of the device that does not comply with the instructions and the precautions specified in...