GS-C200S

GS-C200 GS-C200S INTELLIGENT STEPPER MOTOR CONTROLLERS FEATURES Absolute and incremental positioning Up to 999,999 step per move Speed range to 10,000 steps/s Ramp lenght to 999 steps Single unregulated supply voltage Index and velocity mode Automatic and Home positioning Loops and Delay execution Conditional start and stop Status feedback to the host RS232 communication port Point to point and Multipoint protocol Closed loop operation Counter preset (GS-C200S only) Jump to (GS-C200S only) Jump to on-condition (GS-C200S only) Initialization during execution (GS-C200S only) Auxiliary output voltages +5V, ± 12V DESCRIPTION The GS-C200 and GS-C200S are powerful stepper motor control modules that interface every power sequencer/driv er available on the market. A sophisticated hardware and an easy to learn programming language result in minimal development and debugging time of motion control systems. The modules are supported by dedicated software that includes both an on-screen editor and a debugger that greatly improve the module ease of use. The instruction sets comprise respectively 25 (GSC200) and 29 (GS-C200S) different commands ABSOLUTE MAXIMUM RATINGS Symbol Vs Tstg Top DC Supply Voltage Storage Temperature Range Operating Temperature Range Humidity (non condensing) Parameter Value 42 – 40 to + 85 0 to + 50 0 to 90 Unit V °C °C % which can be executed either under host control or in a stand alone environment. An on board EEPROM is used for program saving and retrieving. ...