GP1AQ36L
GP1AQ36L
s Features
1. Capable of operation at high temperature ( Operating temperature: 90˚C MAX. ) 2. Snap-i...
GP1AQ36L
GP1AQ36L
s Features
1. Capable of operation at high temperature ( Operating temperature: 90˚C MAX. ) 2. Snap-in mounting type 3. Can be mounted on 2 different thickness boards ( 1.0mm, 1.2mm ) 4. Uses 3-pin connector terminal
High Temperature Operation Type OPIC Photointerrupter with Connector
s Outline Dimensions ( Unit : mm )
Internal connection diagram Voltage
regulator Amp. 1 2 3
0 20.0 + - 0.2
s Applications
1. Copiers, laser beam printers 2. Facsimiles 3. FA equipment
10.0
1 V CC 2 VO 3 GND
± 0.1
1.0
15.0 5.0 5.0 5.0
2.5
Slit width
0.1 2-0.5 + - 0.2
1.0
g (6.0) 0.2 9.0 17.0
3 2
1
3.0
1.0
1.6
5.4 1.0 3.4 5.4
2.4 1.0
1.6
*Unspecified tolerances shall be as follows ; Dimensions(d) Tolerance d<=6.0 ± 0.15 6.0< d<=14.0 ± 0.2 14.0<= d ± 0.3 *( ) : Reference dimensions g JAPAN AMP made connector No.171825-3 Recommended connector on the inserted side 172053-3, etc. gg
4.0
2 - 0.9
gg Recommended connecters on the inserted side are shown on the page after next *“ OPIC” ( Optical IC ) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip.
s Absolute Maximum Ratings
Parameter Supply voltage *1 Output voltage *2 Low level output current *3 Operating temperature *3 Storage temperature Symbol VCC VO I OL T opr T stg Rating - 0.5 to + 10 - 0.5 to + 28 50 - 25 to + 90 - 40 to + 90
( Ta = 25˚C )
Unit V V mA ˚C ˚C
*1 Collector-emitter voltage of output
transistor...