Document
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
INTRODUCTION
SN-SA-A0030-02-E 2/43
• WARRANTY
Shanghai SVA NEC Liquid Crystal Display Co., Ltd. (hereinafter called "SVA-NEC") warrants that this product meets the product specifications set forth in this document. If this product under normal operation is found to be non-conforming to the product specifications, and such non-conformance is promptly notified to SVA-NEC within one (1) year after the delivery date, and further such non-conformance is solely attributable to SVA-NEC, SVA-NEC shall repair the non-conforming product or replace it with a conforming one, free of charge. However, this warranty does not apply to any non-conformance that can be found easily by incoming inspections or those resulting from any one of the following˖
1) Unauthorized or improper repair, maintenance or modification 2) Operation or use against specifications, instructions or warnings given by SVA-NEC 3) Any other causes attributable to customer In case SVA-NEC repairs or replaces a product after the one (l)-year warranty period, SVA-NEC shall be entitled to charge for such repair or replacement. Those replaced parts shall be covered with six (6)-month warranty period from the replacement day. Non-conforming products may be replaced with substitutes instead of repair when the manufacture of this product has been terminated. EXCEPT AS EXPRESSLY SET FORTH HEREIN, SVA-NEC DISCLAIMS ANY WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, AND DISCLAIMS ANY REMEDIES.
• MAINTENANCE
The specifications of maintenance parts may be partially changed within equivalent quality or better. In this product, SVA-NEC will not accept to maintain for only mounting parts on circuit board (e.g. connector, fuse, capacitor, resistor, etc.) and only backlight conformation parts (e.g. reflector sheet, light guide plate, etc.).
If SVA-NEC is planning discontinuation for this product, SVA-NEC shall inform it to customers in six (6)-months advance from the issued date of official agreements. In addition, after product discontinuation, SVA-NEC may replace substitutes instead of maintenance parts with whole product.
• CHANGE CONTROL
For the purpose of product improvement, this product design may be changed for specifications, appearance, parts, circuits and so on. In case a design change is affected on the product specifications, SVA-NEC shall inform it to customers in advance.
• HANDLING OF DOUBTFUL POINTS
Any question arising out of, or in connection with, this SPECIFICATION or any matter not stipulated herein will be settled each time upon consultation between both parties.
Not duplication without authorization
Shanghai SVA NEC Liquid Crystal Display Co., Ltd.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CONTENTS
SN-SA-A0030-02-E 3/43
INTRODUCTION ................................................................................................................................. 2 CONTENTS .......................................................................................................................................... 3 1. OUTLINE .......................................................................................................................................... 4
1.1 STRUCTURE AND PRINCIPLE ............................................................................................ 4 1.2 APPLICATIONS....................................................................................................................... 4 1.3 FEATURES............................................................................................................................... 4 2. GENERAL INFORMATION (under normal temperature) ............................................................... 5 3. BLOCK DIAGRAM.......................................................................................................................... 6 4. DETAILED SPECIFICATION.......................................................................................................... 7 4.1 MECHANICAL SPECIFICATIONS ....................................................................................... 7 4.2 ABSOLUTE MAXIMUM RATINGS ...................................................................................... 7 4.3 ELECTRICAL CHARACTERISTICS..................................................................................... 8 4.4 POWER SUPPLY VOLTAGE SEQUENCE AND RIPPLE .................................................. 11 4.5 INTERFACE AND CONNECTOR PIN ALIGNMENT........................................................ 13 4.6 Dimming control......................................