MP1005

MAGNETIC SENSOR MP1005–1007 Series Solid state, magnetic position sensors in adjustable, threaded housing. Features „ Excellent output stability over operating temperature range „ Regulated power supply not required „ Reverse battery protection to -24 V DC „ Wire: 20 AWG, tin plated, polyolefin insulation „ Anodized aluminum housing „ South pole activated „ RoHS Compliant „ Open Collector (NPN) output can be used with bipolar or cmos logic circuits with suitable pull up resistor - Output switches low (off) when the magnetic field at the sensor exceeds the operate point threshold - Output switches high (on) when the magnetic field is reduced to below the release point threshold Applications „ Limit switch „ Home security „ Door position Specifications Part Number Operating Voltage Range (VDC) MP100502 3,8 – 24 Supply Current (mA max.) 7,5 Output Output Saturation Voltage (mV max.) 3-wire sink 400 Output Operating Current Temp Range (mA max.) (°C) Storage Temp Range (°C) Operate Point Gauss (max.) 25 – 40 to 125 – 40 to 125 245 Release Point Gauss (min.) 60 Housing Color Red MP100701 3,8 – 24 7,5 3-wire sink 400 25 – 40 to 150 – 40 to 150 245 60 Black Notes: These sensors require the use of an external pull-up resistor, the value of which is dependent on the supply voltage. See page 27 of our sensor brochure for recommendations. Pull-up resistor should be connected between output (Black) and Vcc (Brown). Wires 20 AWG x 1 m BBB 20 AWG x 1 m BBB Dimensions ...