KBP304

SEP ELECTRONIC CORP. KBP301 thru KBP307 3.0 A Single-Phase Silicon Bridge Rectifier Rectifier Reverse Voltage 50 to 1000V 14.7+ 0.5 Features This series is UL listed under the Recognized Component Index, file number E142814 Ideal for printed circuit board mounting The plastic material used carries Underwriters Laboratory flammability recognition 94V-0 Built-in printed circuit board stand-offs High case dielectric strength High temperature soldering guaranteed 265 /10 seconds at 5 lbs (2.3kg) tension Mechanical Data Case: Reliable low cost construction utilizing molded plastic technique Terminals: Plated leads solderable per MIL-STD-202, Method 208 Mounting Position: Any Weight: 0.065 ounce, 2.2 grams (approx) 12.2+ 0.5 15.2 MIN. 12.7 MIN. 2.41+ 0.25 3.85+0.25 0.81+ 0.05 1.5 + 0.2 4.83+ 0.25 Dimensions in millimeters(1mm =0.0394 11.2+ 0.5 Maximum Ratings & Thermal Characteristics Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz. For Capacitive load derate current by 20%. Parameter Symbol KBP3 01 KBP3 KBP3 02 03 KBP3 04 KBP3 KBP3 05 06 Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 Maximum RMS bridge input voltage VRMS 35 70 140 280 420 560 Maximum DC blocking voltage VDC 50 100 200 400 600 800 Maximum average forward rectified output current at TA=50 C IF(AV) 3.0 Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) IFSM Rating for fusing ( t<8...