3.0A Single-Phase Silicon Bridge Rectifier
SEP ELECTRONIC CORP.
KBP301 thru KBP307
3.0 A Single-Phase Silicon Bridge Rectifier
Rectifier Reverse Voltage 50 to 10...
Description
SEP ELECTRONIC CORP.
KBP301 thru KBP307
3.0 A Single-Phase Silicon Bridge Rectifier
Rectifier Reverse Voltage 50 to 1000V
14.7+ 0.5
Features
This series is UL listed under the Recognized Component Index, file number E142814
Ideal for printed circuit board mounting
The plastic material used carries Underwriters Laboratory flammability recognition 94V-0 Built-in printed circuit board stand-offs High case dielectric strength High temperature soldering guaranteed 265 /10 seconds at 5 lbs (2.3kg) tension
Mechanical Data
Case: Reliable low cost construction utilizing molded plastic technique
Terminals: Plated leads solderable per MIL-STD-202, Method 208
Mounting Position: Any Weight: 0.065 ounce, 2.2 grams (approx)
12.2+ 0.5
15.2 MIN.
12.7 MIN.
2.41+ 0.25
3.85+0.25 0.81+ 0.05
1.5 + 0.2
4.83+ 0.25
Dimensions in millimeters(1mm =0.0394
11.2+ 0.5
Maximum Ratings & Thermal Characteristics
Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz.
For Capacitive load derate current by 20%.
Parameter
Symbol
KBP3 01
KBP3 KBP3 02 03
KBP3 04
KBP3 KBP3 05 06
Maximum repetitive peak reverse voltage
VRRM 50
100 200 400 600 800
Maximum RMS bridge input voltage
VRMS 35
70 140 280 420 560
Maximum DC blocking voltage
VDC 50
100 200 400 600 800
Maximum average forward rectified output current at TA=50 C
IF(AV)
3.0
Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method)
IFSM
Rating for fusing ( t<8...
Similar Datasheet