Document
ALUMINUM ELECTROLYTIC CAPACITORS
LS Snap-in Terminal Type, 85°C Standard series
Withstanding 3000 hours application of rated ripple current at 85°C. Compliant to the RoHS directive (2002/95/EC).
LS
Smaller
LG
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 40 to +85°C (16 to 250V), – 25 to +85°C (350 to 450V)
16 to 450V
56 to 56000µF
± 20% at 120Hz, 20°C
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Measurement frequency :120Hz, Temperature : 20°C
Rated voltage (V) tan δ (MAX.)
16 0.50
25 0.40
35 0.35
50 0.30
63 0.25
80 0.20
100 0.20
160 0.15
180 0.15
200 0.15
250 0.15
350 0.15
400 0.15
450 0.20
Rated voltage (V)
Impedance ratio Z – 25°C/ Z+20°C ZT/Z20(MAX.) Z – 40°C/ Z+20°C
16 to 100 4 20
Measurement frequency : 120Hz
160 to 250
350 to 450
38 12 —
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 85°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right.
Printed with white color letter on black sleeve.
Capacitance change tan δ Leakage current
Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
φ D+1MAX. 4.0±0.5 2.5
Drawing
Polarity bar Sleeve (P.E.T.)
L±2 Pressure relief vent
10 ±0.1
10
4.0±0.5
0.8
+0.2 -0.1
0.8+-00.2.1
Type numbering system ( Example : 200V 390µF)
1 2 3 4 5 6 7 8 9 10 11 12
L L S 2 D 3 9 1 ME L Z
Configuration Capacitance tolerane(±20%) Rated capacitance(390µF)
Rated voltage(200V) Series name Type
Case dia.code
φ D Code 20 Y 22 Z 25 A 30 B 35 C
2-2φ ±0.1
1.5
+0.2 -0.1
(PC board hole dimensions)
(Terminal dimensions)
The other terminal is also available upon request. Please refer to page 272 for schematic of dimensions.
Frequency coefficient of rated ripple current
Frequency (Hz) 50 60 120 300
16 to 100V
0.88
0.90 1.00
1.07
160 to 250V
0.81
0.85
1.00
1.17
350 to 450V
0.77
0.82
1.00
1.16
Coeff.
Minimum order quantity : 50pcs.
1k 1.15 1.32 1.30
10k 1.15 1.45 1.41
50k or more 1.15 1.50 1.43
Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
LS series
Dimensions
Cap. (µF) 8200 10000 12000
15000
18000
22000
27000
33000
39000 47000 56000
Size φD × L(mm)
22 × 25 22 × 30 22 × 30 25 × 25 22 × 35 25 × 30 30 × 25 22 .