Document
ALUMINUM ELECTROLYTIC CAPACITORS
KT For General Audio Equipment, Wide Temperature Range. series
105°C standard for audio equipment. Compliant to the RoHS directive (2002/95/EC).
KT
High Sound Quality
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance
Leakage Current
VZ
Performance Characteristics – 55 to +105°C 6.3 to 50V 0.1 to 33000µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA) , whichever is greater. After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater.
Tangent of loss angle (tan δ)
Rated voltage (V)
6.3
10
16
25
35
tan δ (MAX.)
0.30
0.26
0.22
0.18
0.16
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF
Rated voltage (V)
6.3 10 16 25
Stability at Low Temperature Impedance ratio Z– 25°C / Z+20°C
5
4
3
2
ZT / Z20 (MAX.)
Z– 40°C / Z+20°C
10
8
6
4
50 0.14
Measurement frequency : 120Hz, Temperature : 20°C
35 50 Measurement frequency : 120Hz 22 33
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 105°C tor 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with black color letter on purl blue sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Type numbering system (Example : 16V 1000µF)
1 2 3 4 5 6 7 8 9 10 11
UKT 1C 1 0 2 MPD
Configuration
Capacitance tolerance (±20%)
φD+ MAX.
P±0.5
Rated capacitance (1000µF)
Rated voltage (16V)
L+ MAX.
Pressure φD 5 6.3 relief vent P 2.0 2.5 (φ6.3up) φd 0.5 0.5
0.5 0.5 1.5 1.5
Dimensions
15MIN
4MIN
(mm)
8 10 12.5(25L or smaller) 12.5(31.5L or greater) 16 18 20 22 25
3.5 5.0
5.0
5.0 7.5 7.5 10.0 10.0 12.5
0.6 0.6
0.6
0.8 0.8 0.8 1.0 1.0 1.0
0.5 0.5
0.5
0.5 0.5 0.5 0.5 1.0 1.0
1.5 1.5
1.5
1.5 1.5 1.5 1.5 2.0 2.0
• Please refer to page 20 about the end seal configulation.
V 6.3
10
16
Configuration
25
φD
5 6.3
8 · 10
12.5 to 18 20 to 25
Pb-free leadwire Pb-free PET sleeve
DD ED PD HD RD
35
Series name Type
50
Cap.(µF)
0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 22000 33000
code
0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 682 103 153 223 333
0J 1A
5 5 5 5 6.3 6.3 8 10 10 12.5 12.5 12.5 12.5 16 18 22
11 11 11 11 11 11 11.5 12.5 20 20 25 35.5 40 35.5 40 50
45 55 65 95 160 195 270 420 710 910 1120 1360 1650 2010 2350 2800
5 5 5 5 6.3 8 8 10 12.5 12.5 12.5 12.5 16 18 22 25
11 11 11 11 11 11.5 11.5 16 20 25 35.5 40 35.5 40 40 50
Frequency coefficient of rated ripple current
45 58 68 105 175 240 280 500 810 1050 1300 1570 1890 2400 2650 2880
1C
5 5 5 5 5 6.3 8 8 10 12.5 12.5 12.5 16 18 20 22
11 11 11 11 11 11 11.5 11.5 16 20 31.5 35.5 31.5 35.5 40 50
35 54 65 79 115 190 265 315 560 920 1270 1480 1780 2060 2430 3000
1E
5 5 5 5 5 6.3 8 8 10 10 12.5 12.5 16 18 20 22
11 11 11 11 11 11 11.5 11.5 12.5 20 31.5 35.5 31.5 35.5 40 50
25 36 58 68 83 140 240 290 380 680 1200 1400 1710 2040 2150 2750
1V
5 5 5 5 5 6.3 8 10 10 12.5 12.5 16 18 20 22
11 11 11 11 11 11 11.5 12.5 16 25 40 35.5 35.5 40 50
28 41 61 75 93 150 260 350 460 860 1260 1610 1910 2150 2650
1H
5 11 5 11 5 11 5 11 5 11 5 11 5 11 5 11 5 11 5 11 5 11 6.3 11 8 11.5 10 12.5 10 16 12.5 20 12.5 31.5 16 35.5 18 35.5 20 40 22 50
Case size φ D × L (mm)
1.3 2.9 4.3 7.0 13 20 25 30 46 68 90 115 190 300 410 530 1040 1470 1770 2100 2500
Rated ripple
Rated ripple current (mArms) at 105°C 120Hz
Cap.(µF)
Frequency
0.1 to 47
100 to 470
1000 to 33000
50Hz
0.75 0.80 0.85
120Hz
1.00 1.00 1.00
300Hz
1.35 1.23 1.10
1kHz
1.57 1.34 1.13
10kHz or more
2.00 1.50 1.15
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
CAT.8100Z
.