DatasheetsPDF.com

UKL0J471MDD Dataheets PDF



Part Number UKL0J471MDD
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet UKL0J471MDD DatasheetUKL0J471MDD Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS KL Low Leakage Current series Standard low leakage current series. Compliant to the RoHS directive (2002/95/EC). VR Low Leakage Current KL Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics – 40 to +85°C ( – 40 to +105°C product also available upon request, but product rated at up to 50V less than or equal to φ10 × 12.5 Lmm) 6.3 to 100V 0.1 to 10000µF ± 2.

  UKL0J471MDD   UKL0J471MDD



Document
ALUMINUM ELECTROLYTIC CAPACITORS KL Low Leakage Current series Standard low leakage current series. Compliant to the RoHS directive (2002/95/EC). VR Low Leakage Current KL Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics – 40 to +85°C ( – 40 to +105°C product also available upon request, but product rated at up to 50V less than or equal to φ10 × 12.5 Lmm) 6.3 to 100V 0.1 to 10000µF ± 20% (M), ± 10% (K) at 120Hz 20°C After 1 minute's (for case size 10 × 12.5 or smaller) or 2 minutes' (for case size 10 × 16 or larger) application of rated voltage, leakage current is not more than 0.002CV or 0.2 (µA) whichever is greater. Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) Less than φ10 × 12.5 φ10 × 16 or more 6.3 0.18 0.21 10 0.15 0.17 16 0.12 0.14 25 0.08 0.12 35 0.08 0.12 For capacitance of more than 1000µF, add 0.02 for every increace of 1000µF. 50 0.08 0.10 63 0.07 0.08 100 0.07 0.08 120Hz, 20°C stability at Low Temperature Rated voltage (V) Impedance ratio Z– 25°C / Z+20°C ZT / Z20 (MAX.) Z– 40°C / Z+20°C 6.3 3 (4) 5 (8) 10 2 (3) 4 (6) 16 2 3 (4) 25 1.5 2 (4) 35 1.5 2 (3) 50 1.5 2 (3) 63 1.5 2 (3) 100 1.5 2 (3) 120Hz Values in ( ) applicable to φ10 × 16 or larger case size. Endurance Shelf Life Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C, or 1000 hours at 105°C. Capacitance change Within ±15% of the initial capacitance value (6.3V : Within ±20%) tan δ 150% or less than the initial specified value Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 47µF) Sleeve (P.E.T.) φd φD+0.5 MAX. P±0.5 Pressure relief vent (φ6.3up ) L+ MAX. 15 MIN 4 MIN (mm) (φ10 × 12.5 or smaller) 1.0 φD 5 6.3 8 10 12.5 16 18 (φ10 × 16 or or greater) 1.5 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 • Please refer to page 20 about the end seal configulation. Frequency coefficient of rated ripple current Cap.(µF) Frequency 0.1 to 68 100 to 680 1000 to 10000 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 10kHz or more 2.00 1.50 1.15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 UK L 1 A 4 7 0 MDD ANA 2 Configuration 1 Capacitance tolerance (M : ±20%, K : ± 10%) Rated capacitance (47µF) Rated voltage (10V) Series name Type 1 Configuration 2 In case 105°C unit is required φD 5 6.3 8 · 10 12.5 to 18 Pb-free leadwire Pb-free PET sleeve DD ED PD HD Please refer to page 20, 21, 22 about the formed or taped p.


UKL0J332MPD UKL0J471MDD UKL0J471MED


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)