DatasheetsPDF.com

UHM1C561MPD Dataheets PDF



Part Number UHM1C561MPD
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet UHM1C561MPD DatasheetUHM1C561MPD Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS HM Low Impedance, For PC motherboard series Lower impedance than HD,HC series. Compliant to the RoHS directive (2002/95/EC). HN Low Impedance HM Low Impedance HD Specifications ltem Performance Characteristics Category Temperature Range –40 to +105˚C Rated Voltage Range 6.3 to 16V Rated Capacitance Range 330 to 12000µF Capacitance Tolerance ±20% (120Hz, 20˚C) Leakage Current After 2 minutes' application of rated voltage, leakage current is less than.

  UHM1C561MPD   UHM1C561MPD


Document
ALUMINUM ELECTROLYTIC CAPACITORS HM Low Impedance, For PC motherboard series Lower impedance than HD,HC series. Compliant to the RoHS directive (2002/95/EC). HN Low Impedance HM Low Impedance HD Specifications ltem Performance Characteristics Category Temperature Range –40 to +105˚C Rated Voltage Range 6.3 to 16V Rated Capacitance Range 330 to 12000µF Capacitance Tolerance ±20% (120Hz, 20˚C) Leakage Current After 2 minutes' application of rated voltage, leakage current is less than 0.03CV Tangent of loss angle (tan δ) For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF Rated voltage (V) 6.3 10 16 tan δ (MAX.) 0.22 0.19 0.16 120Hz 20˚C Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z—40˚C / Z+20˚C 6.3 3 10 3 16 120Hz 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 2000 hours at 105˚C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ±25% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Marking Printed with white color letter on black sleeve. Radial Lead Type Sleeve (P.E.T.) φd Type numbering system (Example : 6.3V 1800µF) 1 2 3 4 5 6 7 8 9 10 11 12 U HM 0 J 1 8 2 M P D φD+0.5 MAX. P±0.5 Size Code Configuration L+1.5MAX. Pressure relief vent 15MIN 4MIN Please refer to page 20 about the end seal configulation. Standard Ratings (mm) φ D 8 10 12.5 16 18 P 3.5 5.0 5.0 7.5 7.5 φ d 0.6 0.6 0.6 0.8 0.8 Capacitance tolerance (±20%) Rated capacitance (1800µF) Rated voltage (6.3V) Series name Type Configuration φD Pb-free leadwire Pb-free PET sleeve 8 · 10 PD 12.5 to 18 HD Cap.(µF) 330 470 560 V (Code) Item Code 331 Case size φD × L (mm) 6.3 (0J) Impedance Rated ripple (mΩ) MAX. (mArms) 20˚C / 100kHz 105˚C / 100kHz 471 561 8 × 11.5 30 1140 680 681 820 821 8 × 11.5 8 × 15 1000 102 10 × 12.5 8 × 11.5 30 28 25 30 1140 1490 1540 1140 1200 122 8 × 15 28 1490 10 × 12.5 25 1540 1500 152 8 × 20 16 1950 10 × 16 18 2000 1800 182 10 × 16 8 × 20 19 16 2000 1950 10 × 20 13 2550 2200 222 8 × 20 16 1950 10 × 16 18 2000 2700 272 10 × 20 13 2550 10 × 25 12 2800 3300 332 12.5 × 20 11 3000 10 × 20 13 2550 5600 562 12.5 × 25 10 2900 6800 682 8200 822 16 × 25 9 3070 12000 123 18 × 25 8 3250 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Case size φD × L (mm) 10 (1A) Impedance Rated ripple (mΩ) MAX. (mArms) 20˚C / 100kHz 105˚C / 100kHz 8 × 11.5 30 1140 Case size φD × L (mm) 8 × 11.5 8 × 11.5 10 × 12.5 16 (1C) Impedance Rated ripple (mΩ) MAX. (mArms) 20˚C / 100kHz 105˚C / 100kHz 30 1140 30 1140 25 1540 8 × 11.5 10 × 12.5 30 25 1140 1540 10 × 12.5 8 × 15 8 × 20 10 × 16 25 28 18 18 1540 1490 1870 2000 10 × 12.5 8 × 15 10 × 16 8 × 20 25 28 18 18 1540 1490 2000 1870 10 × 16 8 × 20 10 × 20 18 18 13 2000 1870 2550 10 × 16 8 × 20 18 18 2000 1870 10 × 20 13 2550 10 × 20 13 2550 10 × 25 12.5 × 20 12 11 2800 2800 10 × 25 12 2800 12.5 × 20 11 3000 12.5 × 25 10 2900 12.5 × 25 10 2900 16 × 25 9 3070 16 × 25 18 × 25 9 8 3070 3250 18 × 25 8 3250 CAT.8100Z: In this case, 6 will be put at 12th digit of typeWniudmerbrearninggesoyfsrtaetmin.g. : In this case, 3 will be put at 12th digit of type numbering system. : In this case, 9 will be put at 12th digit of type numbering system. .


UHM1C471MPD UHM1C561MPD UHM1C681MPD


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)