ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
HD High Ripple Low Impedance series
Approved by Reliability Center for Electronic Comp...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
HD High Ripple Low Impedance series
Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C
Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC).
HC
Low Impedance
HD
Smaller
Specifications
ltem Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Endurance
Marking
HV
Performance Characteristics
– 40 to +105˚C
6.3 to 50V
22 to 6800µF
± 20% at 120Hz, 20˚C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
Rated voltage (V) tan δ (MAX.)
6.3 0.22
10 0.19
16 0.16
25 0.14
35 0.12
50 0.10
120Hz 20˚C
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Rated voltage (V)
6.3 10 16 25 35 50 120Hz
Impedance ratio Z–25˚C / Z+20˚C
2
2
2
2
2
2
ZT / Z20 (MAX.) Z–40˚C / Z+20˚C
3
3
3
3
3
3
The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 5000 hours (2000 hours for φD=5 and 6.3, 3000 hours for φD=8, 4000 hours for φD=10), at 105˚C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ± 25% of the initial capacitance value 200% or less than the initial specified valu...
Similar Datasheet